|
|
Posted for "Tracy Crook" <lors01@msn.com>:
Tom, just haven't had time to answer yet. I put my dipstick (& oil filler
port) in a new location on the front cover. There is a flat spot on the
intake/exhaust side that I drilled & tapped then I installed a 3/8 npt plug
with a dipstick brazed to it. I'll upload a picture when I get time.
Moving dipstick & oil filler port made it much easier to fabricate my intake
manifold (another long story for another day).
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
banging & bending tin to get the pan finished with it set up for the
"stock"
dipstick. If that gives me problems later, I'll drop the pan and put in
|
|