Return-Path: <jschuber@juno.com>
Received: from m12.lax.untd.com ([64.136.30.75] verified)
  by logan.com (CommuniGate Pro SMTP 4.1.8)
  with SMTP id 3123138 for flyrotary@lancaironline.net; Fri, 26 Mar 2004 08:49:03 -0500
Received: from cookie.untd.com by cookie.untd.com for <"MJX/NhAS4UNn7QTm17yF8J6WVGAeBZiClr5cKYe4a6YRTwlEd7C7KQ==">; Fri, 26 Mar 2004 05:48:14 PST
Received: (from jschuber@juno.com) 
 by m12.lax.untd.com (jqueuemail) id JRNDWF6K; Fri, 26 Mar 2004 05:48:14 PST
To: flyrotary@lancaironline.net
Date: Thu, 25 Mar 2004 22:00:41 -0500
Subject: Re: [FlyRotary] Re: cooling duct seal?
Message-ID: <20040326.084307.-251601.0.jschuber@juno.com>
X-Mailer: Juno 5.0.33
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
From: Terry L Schubert <jschuber@juno.com>

It sounds like it should work well.


Terry Schubert
Central States Association
Newsletter Editor




> 
> If you'll notice, it passes right above a lateral stiffener bead.  
> It's 
> a tight fit, but the fiberglass in RTV should give me an airtight 
> seal . 
>   I figure I can put a layer of packing tape on the socket and just 
> lay 
> the composite up against for a perfect fit.
>