|
Message
Thanks for
the ideas. I've got several thicknesses of adhesive foam that I got from
McMaster Carr, so I'll probably see if I can use it on the outside of the
gap. The adhesive has proven to be very good, so perhaps it will work
OK. I also like the stretchy neoprene idea as well.
On the other
hand, if the gap works out to be very small, I might try Tommy's duct tape
suggestion at first, then remove it to see if it makes any difference. The
gap is at the very front of the duct, which should be the low pressure area, so
how much leakage with there really be? This will all depend on how small
the gap ends up being.
Finally, who
ever got the idea to saturate fiberglass mat with RTV Marko? It's a very
interesting, yet bizarre idea :-)
Cheers,
Rusty
(packing up the company van)
|