flyrotary@lancaironline.net Mailing List Archive

I am interested in using a bed mount in my 20b installation for my BD-4. Doug, can we see a picture of the bottom of the bed? And it appears that the thickness of the aluminum is ½ inch. Is that correct? Thanks!!

Les Criscillo

Nurse, Pilot, Brewmaster, Maker

https://eaabuilderslog.org/?blproject&proj=7XSZ512C2

From: Rotary motors in aircraft <flyrotary@lancaironline.net> on behalf of Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net>
Sent: Wednesday, May 8, 2024 8:23 AM
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Bed Mount Installatiin

I used alcohol to clean the surfaces before applying the grey Permatex.

Same when assembling the PSRU.

Apply on both surfaces.

Also follow instruction and let it sit for a while before tightening the
bolts all the way.

Finn

On 5/7/2024 9:37 PM, DOUGLAS LOMHEIM dlomheim@aol.com wrote:
> My rebuild is coming along and I’ll soon need to install the Fred Breeze “bed mount”. I did this per the original instructions in 2008 and when I recently filled it with oil it started to weep out thru the grey permatex.   I there was wondering how you all did yours so it didn’t weep out oil??? Thanks for any lessons identified! Doug
>
>
>
> Sent from my iPhone
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

--
Homepage: http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html