Thanks Steve. We will have a look.
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Monday, July 12, 2021 5:52 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: QNF Chip Programmer
Hi Bobby
Sounds like you may not have one of Tracy’s EM’s.
Versions 2&3 at least have an Engine Information Page that displays important parameters that make diagnosis much easier.
I’ve just this week been wondering if my Head Unit mode switch was faulty and Finn (Thanks mate) suggested the Engine Info Screen.
Here is a table of the Engine Info Screen and displayed parameters in case its helpful to anyone.
1: Enter Engine Info Screen by - Holding Execute and pressing UP
2. The hex data is just my setup at that time.
3. Row 3 Column 6 displays the EC mode switch position.
4. Note the shaded cells which are key parameters for the various programable Tuning Modes.
5. ENGINFO field bits 0=TURBO,1=LGSEC,2=O2SenType,3=TEMPSENSOR,4=ROTARYEng/MAP Sensor,5=BUSENSOR,6=CONT,7=CSON
Hope this is helpful to others.
Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.
image002.png
|