I think I paid less than $20 for my PICKKIT3 (clone, I guess).
You may get away with programming it in-circuit (you'll have to power the EC2 board) if the board has the 5 or 6 header pins.
I put an PLCC68 socket on a piece of prototyping PCB with 6 pins for the PICKIT3 connector.
All ground and supply pins have to be connected.
Search for and download PIC18F6680ProgrammingSpecs.pdf
Finn
On 7/11/2021 10:15 PM, Bobby Hughes BHughes@qnsinc.net wrote:
Finn / Tracy
We think Dennis H. has a corrupt A controller chip. He inadvertently started the engine in Mode 4 and things went bad. The B controller is running normally so we have a good chip to work with. This is one of the early
big box EC2’s. Dennis and I worked a few hours trying to tune the A controller. We reset Modes 1,3,4,6,8.multiple times. Mode 2 is to copy A to B and I don’t think Mode 5 and 7 are used according to the book. There may be an issues with the Programming
Head. Sometimes we did managed to keep the engine running with the manual mixture control. We noticed changes to the engine while cycling through the program modes. On one attempt we managed to get Mode 3 adjusted at 19” MP. We were then able to make adjustments
in Mode 1 up until about 24” MP and the engine just stopped. We restarted the engine and we could not keep it running or make any Mode 1 adjustment that helped. .
We pulled the EC2 and Program Head for inspection. The Mode switch is a little sticky so we will use mine to on the next attempt. So any advice were to get a reasonable priced compatible 64-pin QFN programmer? Dennis’s grandson will be
the one copying the chip and said Microchip’s programmer was about $400. We are looking for chips and may have located some at Microchip direct.
PN: PIC 18F6680 –I/L
https://www.microchipdirect.com/product/PIC18LF6680-I/L?dfw_tracker=64197-PIC18LF6680-I%2FL&gclid=EAIaIQobChMIpe6Ny7fc8QIViwytBh0JDwLZEAQYASABEgJrufD_BwE
Thanks,
Bobby J Hughes
Disclaimer
The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are
not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived by
Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a
safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more
Click Here.