| Matt
On down wind we set: Prop to full fine. AFR at best power 0.9 or 13.3 Same as Bobby, finding this area of the map very difficult to tune. I have to manually adjust mixture as it tends to go very lean as we reduce airspeed. I havn’t changed timing from default for Tracy’s Renesis programming.
Steve Izett Renesis 4 port RD1-C EC2
With the CS prop at 2300 rpm and MP below 20” I found F/A between 15.8 and 14.5 worked well. I found this area very difficult to tune. Possibly because staging was set at 20”. I have no idea what the EC3 time is in this area. Bobby From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Thursday, June 24, 2021 8:25 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Timing / AFR landing What AFR / spark timing are you guys aiming for on downwind / landing ?
Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.
This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.
|