From: "Stephen Izett stephen.izett@gmail.com" <flyrotary@lancaironline.net>
Received-SPF: pass
 receiver=logan.com; client-ip=209.85.210.173; envelope-from=stephen.izett@gmail.com
Content-Type: text/plain;
	charset=utf-8
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (Mac OS X Mail 14.0 \(3654.80.0.2.43\))
Subject: Re: [FlyRotary] PSRU oil pressure
Date: Mon, 24 May 2021 18:25:41 +0800
References: <list-40367@logan.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
In-Reply-To: <list-40367@logan.com>
Message-Id: <6A0E20CC-F357-4DA1-B245-489F0D8CB644@gmail.com>

Hi People=08=08=08

Can someone enlighten me with how to use the Flyrotary archive?
I have had so much trouble searching for things in the past.
What is the Filter and what does it do?
How do I search for a message number, instead of paging through all the =
pages?
Sorry if I=E2=80=99m being seriously dumb here!


Steve Izett

> On 24 May 2021, at 1:49 pm, Stephen Izett stephen.izett@gmail.com =
<flyrotary@lancaironline.net> wrote:
>=20
> Hi Steve.
>=20
> How does that quantity of oil get to the planetary set, is the shaft =
drilled?
> Reducing this path wasn=E2=80=99t an option? Just easiest to enlarge =
the drain and keep the flow for cooling?
>=20
> Thanks very much Steve.
>=20
> Steve I
>=20
>=20
>=20
>> On 24 May 2021, at 1:11 pm, Sboese sboese@uwyo.edu =
<flyrotary@lancaironline.net> wrote:
>>=20
>> Steve,
>>=20
>> The oil flow rate of the front drain of my drives was about 1/4 =
oz/min whereas the total from both drains was about 90 oz/min.  So I did =
not enlarge the front drain.  The rear drain was enlarged to 1/2=E2=80=9D =
npt through the aluminum ring. =20
>>=20
>> See archived message 64583 of January 13, 2019 with a photo of the =
modification.
>>=20
>> Steve Boese
>>=20
>>> On May 23, 2021, at 10:13 PM, Stephen Izett stephen.izett@gmail.com =
<flyrotary@lancaironline.net> wrote:
>>>=20
>>> =EF=BB=BF Thanks Steve B.
>>>=20
>>> Did the two drains of Tracy=E2=80=99s drive need to be enlarged in =
order to upgrade to your recommended line size or are they already large =
enough and require only larger fittings?
>>> My drain lines are rubber and I thought I might replace them during =
some maintenance, and then add the breather when I next need to pull the =
drive.
>>>=20
>>> Thanks.
>>>=20
>>> Steve Izett
>>=20
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html
>=20
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   =
http://mail.lancaironline.net:81/lists/flyrotary/List.html