flyrotary@lancaironline.net Mailing List Archive

Neil: Yes the input shaft has a spline that fits into the center of the clutch plate.

The input shaft have 26 spines with diameter at splines of 1.560 inch

Phots of the input shaft:

File_001.jpeg

File_000.jpeg

The propellor shaft dimensions will i send tomorrow, as i don`t have a press that are strong enough, for the locking pins on the shaft

Le Roux

On Wed, Feb 10, 2021 at 11:38 PM 12348ung@gmail.com <flyrotary@lancaironline.net> wrote:

Le Roux,
Just wondering how far you have gotten into the redrive. Seems the drive is used by cutting down a clutch plate? I assume therefore that the input shaft has a spline to fit the clutch plate spline and not the fine multi spline that Tracy uses?
Do you have any measurements as to the prop shaft -- photos?
Neil.

-----Original Message-----
From: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Friday, November 27, 2020 7:16 AM
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: [FlyRotary] Ross Redrive se ex se

Terry : Thanks Terry for the Ross Redrive the parcel arrived on Monday 23 Nov .
Neil if you want some dimensions on the hollow propellor shaft your welcome.
Regards

--
Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html