|
|
Finn Lassen wrote:
Tracy Crook wrote:
The -C drive has very different internals but I will look at the feasibility of reworking the -B housing to receive the -C guts. I think it can be done. Yes, the -C bolts right up to the same adapter plate. I think you are right about the 2.85 becoming the preferred ratio, but only if you can handle the longer prop.
Sounds like Paul Lamar was right all along...
I simply couldn't resist throwing that in here :)
Finn
(cleaning out my inbox to make room for responses)
That's what I thought too, but didn't have the guts to say it here.
It may not help us pusher guys though, we can't handle large diameter props, possible prop strike on rotation.
--
Perry Mick
http://www.ductedfan.com
|
|