X-CGP-ClamAV-Result: CLEAN X-VirusScanner: Niversoft's CGPClamav Helper v1.23.0 (ClamAV engine v0.103.0) From: "Finn Lassen finn.lassen@verizon.net" Received: from sonic304-21.consmr.mail.ne1.yahoo.com ([66.163.191.147] verified) by logan.com (CommuniGate Pro SMTP 6.2.14) with ESMTPS id 813594 for flyrotary@lancaironline.net; Wed, 07 Oct 2020 08:49:51 -0400 Received-SPF: pass receiver=logan.com; client-ip=66.163.191.147; envelope-from=finn.lassen@verizon.net DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=verizon.net; s=a2048; t=1602074973; bh=kismgq5LDbeFD/vhogWgQ7OFtLeNCIsfRJXsKGpxI24=; h=Subject:To:References:From:Date:In-Reply-To:From:Subject; b=TSqCAYnFG9r3EVrIS9X7j4AXRz6/KyT3903RPPWJMBQ5dx+6q+Z496a7flMUQ46kRwZQESPMq1beVmP2OSUKfnk2CV4RcZAnbHF3k82ZlK/F+7W6ySRBQkQTihKklr6rwkTFAxEojE66uMJEnGn9xG2td3WbpwemJcfBD9Z37lMbflL+X3VWJkN1mK4ktQj4dswIx+gp9EQUpwuKOYroxzWwvv+fybClGeb7OjsNT3lKqzsEzQSvRrHWOv0Q08vMY6256GCLmsVPaPZb6TmbTUry0LcJv1Fwx3WNQWdAVqjIYYyg23Mhg7i85tGDUkRePTGoI5A9b4D/minLGRdGVQ== X-YMail-OSG: IqHh_UQVM1mOw2sI8LTzXDLZtNKqr.02KaKKq1XFGSaMJGsDN2sq9kv.zXY6K9B qSWCU.qztEJBPDxDpp0V_kjMUI852QmETjuzT5iaE5Haq7mGP6tf1c.POozaRSiJ3ZkxoXPOtlLb XBn3G6gkqtrLZqu_Ft0qRRIsdMB7G_R7FIsTXDiIMyiDV2ozi7jCm.MZj1QfvCH5gKesTbEAzASN 8weX3peFJQmuocTs4qj8fQenZ0jpN_YPNdQT3No_AMj0neZVUTmF.M0b0Ed5r2Q60VTkIq16dr7Q NuNs59ofsunIvD3sVbitrHMC6dS7DdQdssTg84DX2773Pqj_ONKAOr86T8N1iuFjPSaNRcTpqcK7 rP5KHRKCt_jnbut5zkNWFZkXMn6hyMAj3ZOemq2I0N06lo1CbIjF11FLj0WLzJSWEeUWkvIHtAJC 69kehglExhhJiH40vdtdp5WGgV.NaYKk.mWruLvvtxOAKICb9Z2xnjiJncTLWu20TjlxiUY6H7SK NQjdopCm1shyVbgM4jV_oSVjc6nGh5gyqTwfgQArhU7wTc.THRi6YGW2JQzVnFxxqoMSgnKOldk3 MgESZ5xy7FyM7Ix1yWT18VsFPBc6.CseIGkKhYJj2OWMazFNvFWVSlYrNQ5CHr9Vb06psLkl8Xwy 6SsVPiFkDjW2Fhu_Hix.Sr1cLkAaMGoFDKnjnlfOaqlZXW_lgOH5nqCQ2e.uiHDWkCDhNO2D9ZNK Nm90H2NhrSScL_1MnsIf40PrlSQLkVxioCxP8_5gZ0Mvb79GQuH2E4jK8YbA6_AcaOWCRYit5xbx 85Rt5dKP4Qh9.XNJhsl3IGjm3Ok2XzPVJR0PnE7UtwZS2eyaIpibO6b3VrxwS0eRv_Ogs_nP90M3 7sIbjUH.uJPkzllO2HjY4Dl5_JS9hIGzNRyO2_8zXPK6ctHDpW9OQkFTALnrHtxWGQygOupiOp7b DehPcJPAY83hPlbhu6TWReJ1DiB_tnmnWQo32nSCtuYVevpLS.wOg5P0el7beuhYz5GK3zRGzWCd fOHam3pfscbzpqpNgfVhlrV4I0Kg7u9KUH0bm_d3mOhnJZHSRY_JRRDlJh2lqW4oh6cBcNzgB.oj XRoeCht47rF9gsgdR9iHegFkMhKHdh30hoPvbmLUbPayMCc2B67XYnA40pl1JlISlyx5tG62tGRl TTzcntYJEECZc7JKVPq9YHB1dKCjhk4obAhavXqdF_eXTbpkWxifd1Ech_ZWttehD2fweQFf.ZHd oWMC3ao53RjMwBtQlZ2nVHIydzrlyxiLQG8Q.NjYXZRg.YADi1UhG4F0lZPpY8MfNBo.nypP2pn9 8nSNeMjEPJ0_QI6WwfUAaP3WT_p2ZTbFzngYcDPIrwV2XIT0EoV7CBv34sC0ujWMASsSeLg2jVrF 3.FsIJvEs9.ADUvtWg6wrM7AgMy4l4LuaIPx_3aiileRfh2rgS9.Ijp69QP.27mVglDk8UezJ54P OMf2co5EamGaF0FRNtU3hLJMW3GyZqE5RoqjrjlZofIJCbHJNppqQwVCy2SPHlJyv_xUPgfCic7w AL.T_dss1ILY- Received: from sonic.gate.mail.ne1.yahoo.com by sonic304.consmr.mail.ne1.yahoo.com with HTTP; Wed, 7 Oct 2020 12:49:33 +0000 Received: by smtp423.mail.bf1.yahoo.com (VZM Hermes SMTP Server) with ESMTPA ID 53f89da07b81bda85f5eab6fd69dea43; Wed, 07 Oct 2020 12:49:29 +0000 (UTC) Subject: Re: [FlyRotary] Re: Mufflers To: Rotary motors in aircraft References: Message-ID: <06d7d72c-70b2-6e6f-41ce-478fc874cdcb@verizon.net> Date: Wed, 7 Oct 2020 08:49:26 -0400 User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:52.0) Gecko/20100101 Thunderbird/52.9.1 MIME-Version: 1.0 In-Reply-To: Content-Type: multipart/alternative; boundary="------------5C102EEADA64C575C6A40260" Content-Language: en-US X-Antivirus: Avast (VPS 201006-2, 10/06/2020), Outbound message X-Antivirus-Status: Clean X-Mailer: WebService/1.1.16795 mail.backend.jedi.jws.acl:role.jedi.acl.token.atz.jws.hermes.aol Apache-HttpAsyncClient/4.1.4 (Java/11.0.7) Content-Length: 103259 This is a multi-part message in MIME format. --------------5C102EEADA64C575C6A40260 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Prop balancing was my first thought too. Engine will not vibrate unless you've got faulty ignition, intake problems or similar. I'm my RV-4 I won't have to torque down Berry mounts. I don't have any. Tracy talked me out of using them. That, of course, makes prop balancing essential. I'm currently fitting the spinner to the RV-4 -- perhaps a few more days. There's a place where one can rent a dynamic prop balancer for a week for $150. Perhaps we could share the cost? Finn On 10/6/2020 9:29 PM, Matt Boiteau mattboiteau@gmail.com wrote: > It's 42miles as the crow flies. I got the normal 25nm increased to 45nm. > Now that I'm flying, I'll update the group on my progress. 8 hours in. > I think the exhaust is shaking the plane, I was hoping the engine be a > smoother plane ride. What do people torque down the Berry mounts to, > really tight to compress? > > - Matt Boiteau > > > On Wed, Sep 30, 2020 at 2:02 PM Finn Lassen finn.lassen@verizon.net > > wrote: > > Hey, I'm just a stone-throw away (9FL5). Surely your test area is > includes that? > You're welcome to stop by. > > Finn > > On 9/30/2020 8:59 AM, Matt Boiteau mattboiteau@gmail.com > wrote: >> Williston (X60 airport) >> I'll be there from Oct 3rd to 29th, to fly off my 25hours. So far >> I have 6 hours and had to increase my oil inlet duct size, and >> redo the exhaust so I could hear. We'll see what new bugs will >> pop up. I'll be posting a lot to keep people in the loop and help >> me along the way. >> >> If people want to visit in person to check out the setup and give >> me advice, I'm all ears. >> >> - Matt Boiteau >> >> >> On Wed, Sep 30, 2020 at 5:38 AM lehanover lehanover@aol.com >> > > wrote: >> >> Where in Florida? I live in Florida in the winter.  Lynn E. >> Hanover >> In a message dated 9/30/2020 12:48:34 AM Atlantic Standard >> Time, flyrotary@lancaironline.net >> writes: >> >> I've been stuck in Canada far too long. Finally flying to >> Florida on Sat to see my plane and start flying off the >> hours (trouble free I hope) >> my email is my name (without spaces) at normal gmail dot com. >> >> - Matt Boiteau >> >> On Tue, Sep 29, 2020 at 3:02 PM Bobby J. Hughes >> bhughes@qnsi.net >> > > wrote: >> >> Matt, >> >> Did you make it back to Canada in time for the first >> snow? I would like to discuss your MS install off >> list when you have time. >> >> Bobby >> >> *From:*Rotary motors in aircraft >> [mailto:flyrotary@lancaironline.net >> ] >> *Sent:* Wednesday, July 08, 2020 7:10 PM >> *To:* Rotary motors in aircraft >> *Subject:* [FlyRotary] Re: Mufflers >> >> Sadly, by the time the welder and I finished, I only >> got about 2 hours on the plane before I had to pack >> up my winter trip. I was planning to go back in March >> to FL (I live in Canada) to start flying off the 25 >> hours, but you know how that all went. So I'm just >> sitting here waiting for the borders to open up and >> fly my plane! >> >> Early conclusion is it worked pretty darn good. I'd >> say I'm equivalent to an IO-360, maybe a tad quieter. >> Also on ground testing only, I quickly mocked up a >> long tube under the plane with holes drilled in it >> (with the end capped off), and it pretty much got rid >> of all the engine noise, only prop noise. Haven't >> flown with that yet. One thing I still want to do is >> test the backpressure. Making sure the CAN has enough >> holes inside. >> >> The best price I found on 321 was from >> ProFabrication. I went with 2.75" 20ga (0.035") on >> the downpipe & outlet. >> https://www.profabrication.com/index.php/products/straight-tubing/321-stainless-steel.html >> >> I did use SPD Exhaust for the double slip joints at >> the primaries and downpipe. 2" 16ga (0.06") >> http://www.spdexhaust.com/pdfs/22-23_Tubing.pdf >> >> For the CAN, McMasterCarr 24"x24" 18ga (0.05") rolled >> into I think a 5 or 5.5" can. You can go heavier ga, >> I just guessed. >> https://www.mcmaster.com/1754T51/ >> >> - Matt Boiteau >> >> On Wed, Jul 8, 2020 at 2:35 PM Bobby J. Hughes >> bhughes@qnsi.net >> > > wrote: >> >> I’m at the exhaust header stage in my S21 FWF >> build. I’m considering a traditional header,  3-1 >> merge collector with 1.75” primaries to a 2.5” >> tube. I’m trying to be very weight conscious and >> looking for possible alternatives. The CA >> manifold can likely be built for nearly the same >> weight as the header design in the picture. I’m a >> little concerned with the tangential design. Mark >> S built and tested one on his 20B. It ran hot and >> caused the outer water jacket seals to fail. Mark >> was not running a wideband so he couldn’t see a >> clear relationship between F/A and EGT’s.  He may >> have be running at or near peak EGT’s. EGT’s for >> the renesis can be kept to between 1500F -1600F >> with a little extra or a little less fuel. I will >> like install the coolant radiator on the belly so >> adding an external muffler would keep it off >> centerline. >> >> I have located some reasonable priced Inconel 625 >> 0.040 sheets. If rolled into a 5-6” tube, would >> this thickness be sufficient for a muffler shell >> or the CA / tangential manifold tube? >> >> Matt, >> >> How is your CA header holding up? >> >> Thanks, >> >> Bobby >> >> *From:*Rotary motors in aircraft >> [mailto:flyrotary@lancaironline.net >> ] >> *Sent:* Saturday, January 25, 2020 7:53 PM >> *To:* Rotary motors in aircraft >> *Subject:* [FlyRotary] Re: Mufflers >> >> Okay so after 2 full days of having our welder >> out, finally brought the CAD design to life. >> Except both days were all nighters, so I was too >> tired and busy to take 'in progerss' pictures. >> Was tricky to build, which made the hourly >> welding cost sky high, more then the engine >> itself. Hopefully that means I can save money in >> the future on hearing aids. >> >> Thanks Charlie for the tip on the spectrum >> analyzer. I didn't get any before numbers, but >> it's all low Hz now. That harsh high pitch is >> gone. Db's are still there, but I'd say with just >> the muffler design, it's comparable >> to typical lycoming. I can start to hear the prop >> noise over the engine noise. I measured back >> pressure around 3.5psi @ 2200rpm prop. >> >> I ran out of time to flight test the long pipe >> under the airplane. I quickly held it up with my >> hands and the exhaust pretty much disappeared >> with the prop taking over the noise. Before >> flying, I want to add backpressure gauge to that >> part and drill holes to find a balance between >> backpressure and noise. >> >> SO the "header" muffler should make quite like >> any other plane, and the "under belly" pipe will >> make you standout in silence. >> >> Since this email type newsletter is from >> the dinosaur ages, I'll add pictures and video to >> https://www.homebuiltairplanes.com/forums/threads/exhaust-within-subcowl.30848/page-2#post-512762 >> >> >> - Matt Boiteau >> >> On 2020-01-18 5:29:51 PM, Matt Boiteau >> > > wrote: >> >> Have started on the exhaust. Made all three >> primaries 2" double slip joints (that alone >> took almost a whole day with welder). The big >> can (CA - Centrifugal Accumulator) rolled >> into a 5" can and we'll secure it to the >> engine with straps. >> >> The inside pipe is 2.75" which has an area of >> 5.94sq". I'm not sure if there's a magic >> number, but all the holes I drilled equaled >> to just under double the area (11sq"). Most >> are 3/8, but I did add some 1/2 to get the >> total area up. Could we get away with >> drilling less holes? Not sure. I'll be able >> to drill out one side end of the CA and pull >> out the inner tube and change out. >> Will experiment later with less holes and >> monitor back pressure. Will weld a npt bung >> on the CA and use the wideband bung to >> measure the different. >> >> The previous exhaust with just an Aero >> Turbine 2525XL, measured ~113dBA. With >> nothing, was closer to 120dBA. Funny around >> 2000 prop rpm was louder then at 2300 full >> static. >> >> *Error! Filename not specified.* >> >> - Matt Boiteau >> >> On 2020-01-07 12:19:23 AM, Matt Boiteau >> mattboiteau@gmail.com >> >> > > wrote: >> >> Okay I'll make all 3 primary tubes (2" >> diameter) all double slip fit. >> Welding batwing tabs (picture below) on >> to either side on the slips, will hold >> the muffler to the header but allow >> expansion. >> >> Having troubles finding 2.75" bends in >> 321, so I might have to just switch to 3" >> downpipe that is more common. Vband clamp >> before downpipe for easier removal and >> under the plane to allow adding >> additional exhaust setups (long pipe with >> holes drilled in it, fishmouth tailpipe, etc) >> >> >> I found a company that makes flex bellows >> in 321. I'm just not sure if I should >> have it vertical on the downpipe or close >> to the muffler horizontal before the >> first 90degree bend downwards. >> https://www.aceraceparts.com/products/3-000-flex-bellow-assembly-321-stainless?variant=11067135556 >> >> *Error! Filename not specified.* >> >> Batwing tabs >> >> *Error! Filename not specified.* >> >> - Matt Boiteau >> >> On 2020-01-03 4:22:18 PM, Neil Unger >> 12348ung@gmail.com >> >> > > >> wrote: >> >> Mat, >> >> As usual I have no idea. I made all 3 >> slip joints and to date no grief in >> that area.  I am coming around to the >> stock manifold in some way.  Yes it >> is heavy, but appears to muffle the >> noise as well.  Know of 2 >> installations that use the stock >> manifold with a simple muffler after >> and both claim "acceptable" noise. It >> appears that the stock manifold has a >> big influence on noise?? Would prefer >> a DB reading, but if not available it >> is what it is.  All is compromise, >> weight, cost, time, but at the end of >> the day it has to work. >> >> Still working on the turbo even >> though the world is on holidays.  All >> to save my hearing.  So far the >> rotary is definitely "unique" as far >> as a turbo is concerned. The heat >> generated exceeds all else  Two >> things to date -- special exhaust >> wheel and water cooled bearing body >> =, all for heat. Have modified the >> stock front plate on the renesis to >> take an electric water pump.  That is >> the simple bit. >> >> Neil. >> >> On 1/4/2020 5:37 AM, Matt Boiteau >> mattboiteau@gmail.com >> wrote: >> >> okay I found a good company >> called SPD Exhaust. They have >> everything you need in 321ss. >> >> With the engine being an RX8, we >> have three exhaust ports. Should >> I weld the front and back solid >> to the muffler, and make the >> middle one a slip fit for >> expansion? Or vice-vesa? >> >> *Error! Filename not specified.* >> >> - Matt Boiteau >> >> On 2019-12-28 11:03:42 AM, >> Finn Lassen >> finn.lassen@verizon.net >> >> >> >> wrote: >> >> I did something similar with >> my RV-3 13B decades ago. It >> split open at the welds >> around one of the pipes from >> the manifold into the the big >> outer tube True, it did use >> individual manifold base >> plates, not the connected >> factory manifold and the big >> tube was only 0.035. >> >> Still, I would recommend slip >> joints on two of the three >> pipes, like I added on one of >> the pipes (cut through and a >> surrounding bigger pipe -- >> missing in picture). >> >> *Error! Filename not specified.* >> >> Can't remember why I went >> from the above to individual >> runners into a perforated >> pipe under the fuselage. >> Probably got lured by promise >> of increased power by tuned >> lengths and still >> uncomfortable by the muffler >> being inside the cowling. >> >> Finn >> >> On 12/28/2019 12:10 AM, Matt >> Boiteau mattboiteau@gmail.com >> >> wrote: >> >> This is what I'm going to >> try in a few weeks. >> >> "/Exhaust valve opens and >> a pulse of hot gas puffs >> out through a short pipe, >> then >> //tangentially// into a >> cylindrical canister. >> Being tangential, the >> pulse flattens out and >> travels >> //helically// (rather >> than bouncing and >> reverberating around) >> along the inside curved >> wall of the can, >> spiraling toward the >> exit, where it comes out >> more uniform in flow and >> so pretty quiet."/ >> >> Outer pipe = 321 ss 0.050 >> thick. Flat plate bent to >> a 5" tube >> >> Inner pipe = 321 ss 0.036 >> thick. 2.5" diameter >> >> (I might use 302ss 0.065 >> since I already have it) >> >> >From my understanding, the >> area of the holes should >> be double the area of the >> inner pipe. >> >> - Matt Boiteau >> >> *Disclaimer* >> >> The information contained in this communication >> from the sender is confidential. It is intended >> solely for use by the recipient and others >> authorized to receive it. If you are not the >> recipient, you are hereby notified that any >> disclosure, copying, distribution or taking >> action in relation of the contents of this >> information is strictly prohibited and may be >> unlawful. >> >> This email has been scanned for viruses and >> malware, and may have been automatically archived >> by *Mimecast Ltd*, an innovator in Software as a >> Service (SaaS) for business. Providing a *safer* >> and *more useful* place for your human generated >> data. Specializing in; Security, archiving and >> compliance. To find out more Click Here >> . >> >> -- >> Homepage: http://www.flyrotarycom/ >> >> Archive and UnSub: >> http://mail.lancaironline.net:81/lists/flyrotary/List.html >> > > > > Virus-free. www.avast.com > > > > <#m_2355782478043551170_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus --------------5C102EEADA64C575C6A40260 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit
Prop balancing was my first thought too.

Engine will not vibrate unless you've got faulty ignition, intake problems or similar.

I'm my RV-4 I won't have to torque down Berry mounts. I don't have any. Tracy talked me out of using them.

That, of course, makes prop balancing essential. I'm currently fitting the spinner to the RV-4 -- perhaps a few more days. There's a place where one can rent a dynamic prop balancer for a week for $150. Perhaps we could share the cost?

Finn

On 10/6/2020 9:29 PM, Matt Boiteau mattboiteau@gmail.com wrote:
It's 42miles as the crow flies. I got the normal 25nm increased to 45nm. 
Now that I'm flying, I'll update the group on my progress. 8 hours in. I think the exhaust is shaking the plane, I was hoping the engine be a smoother plane ride. What do people torque down the Berry mounts to, really tight to compress?

- Matt Boiteau


On Wed, Sep 30, 2020 at 2:02 PM Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
Hey, I'm just a stone-throw away (9FL5). Surely your test area is includes that?
You're welcome to stop by.

Finn

On 9/30/2020 8:59 AM, Matt Boiteau mattboiteau@gmail.com wrote:
Williston (X60 airport)
I'll be there from Oct 3rd to 29th, to fly off my 25hours. So far I have 6 hours and had to increase my oil inlet duct size, and redo the exhaust so I could hear. We'll see what new bugs will pop up. I'll be posting a lot to keep people in the loop and help me along the way.

If people want to visit in person to check out the setup and give me advice, I'm all ears.
 
- Matt Boiteau


On Wed, Sep 30, 2020 at 5:38 AM lehanover lehanover@aol.com <flyrotary@lancaironline.net> wrote:
Where in Florida? I live in Florida in the winter.   Lynn E. Hanover
 
In a message dated 9/30/2020 12:48:34 AM Atlantic Standard Time, flyrotary@lancaironline.net writes:
 
I've been stuck in Canada far too long. Finally flying to Florida on Sat to see my plane and start flying off the hours (trouble free I hope)
my email is my name (without spaces) at normal gmail dot com.

- Matt Boiteau

On Tue, Sep 29, 2020 at 3:02 PM Bobby J. Hughes bhughes@qnsi.net <flyrotary@lancaironline.net> wrote:

Matt,

 

Did you make it back to Canada in time for the first snow? I would like to discuss your MS install off list when you have time.

 

Bobby

 

 

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Wednesday, July 08, 2020 7:10 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Mufflers

 

Sadly, by the time the welder and I finished, I only got about 2 hours on the plane before I had to pack up my winter trip. I was planning to go back in March to FL (I live in Canada) to start flying off the 25 hours, but you know how that all went. So I'm just sitting here waiting for the borders to open up and fly my plane!

Early conclusion is it worked pretty darn good. I'd say I'm equivalent to an IO-360, maybe a tad quieter. Also on ground testing only, I quickly mocked up a long tube under the plane with holes drilled in it (with the end capped off), and it pretty much got rid of all the engine noise, only prop noise. Haven't flown with that yet. One thing I still want to do is test the backpressure. Making sure the CAN has enough holes inside.

The best price I found on 321 was from ProFabrication. I went with 2.75" 20ga (0.035") on the downpipe & outlet.
https://www.profabrication.com/index.php/products/straight-tubing/321-stainless-steel.html

I did use SPD Exhaust for the double slip joints at the primaries and downpipe. 2" 16ga (0.06")
http://www.spdexhaust.com/pdfs/22-23_Tubing.pdf  

For the CAN, McMasterCarr 24"x24" 18ga (0.05") rolled into I think a 5 or 5.5" can. You can go heavier ga, I just guessed. 
https://www.mcmaster.com/1754T51/  

- Matt Boiteau

 

 

On Wed, Jul 8, 2020 at 2:35 PM Bobby J. Hughes bhughes@qnsi.net <flyrotary@lancaironlinenet> wrote:

I’m at the exhaust header stage in my S21 FWF build. I’m considering a traditional header,  3-1 merge collector with 1.75” primaries to a 2.5” tube. I’m trying to be very weight conscious and looking for possible alternatives. The CA manifold can likely be built for nearly the same weight as the header design in the picture. I’m a little concerned with the tangential design. Mark S built and tested one on his 20B. It ran hot and caused the outer water jacket seals to fail. Mark was not running a wideband so he couldn’t see a clear relationship between F/A and EGT’s.  He may have be running at or near peak EGT’s. EGT’s for the renesis can be kept to between 1500F -1600F with a little extra or a little less fuel. I will like install the coolant radiator on the belly so adding an external muffler would keep it off centerline.

 

I have located some reasonable priced Inconel 625 0.040 sheets. If rolled into a 5-6” tube, would this thickness be sufficient for a muffler shell or the CA / tangential manifold tube?

 

Matt,

 

How is your CA header holding up?

 

Thanks,

 

Bobby

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Saturday, January 25, 2020 7:53 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Mufflers

 

Okay so after 2 full days of having our welder out, finally brought the CAD design to life. Except both days were all nighters, so I was too tired and busy to take 'in progerss' pictures. Was tricky to build, which made the hourly welding cost sky high, more then the engine itself. Hopefully that means I can save money in the future on hearing aids.

Thanks Charlie for the tip on the spectrum analyzer. I didn't get any before numbers, but it's all low Hz now. That harsh high pitch is gone. Db's are still there, but I'd say with just the muffler design, it's comparable to typical lycoming. I can start to hear the prop noise over the engine noise. I measured back pressure around 3.5psi @ 2200rpm prop.

I ran out of time to flight test the long pipe under the airplane. I quickly held it up with my hands and the exhaust pretty much disappeared with the prop taking over the noise. Before flying, I want to add backpressure gauge to that part and drill holes to find a balance between backpressure and noise.

 

SO the "header" muffler should make quite like any other plane, and the "under belly" pipe will make you standout in silence.

 

Since this email type newsletter is from the dinosaur ages, I'll add pictures and video to https://www.homebuiltairplanes.com/forums/threads/exhaust-within-subcowl.30848/page-2#post-512762

 

- Matt Boiteau

On 2020-01-18 5:29:51 PM, Matt Boiteau <mattboiteau@gmail.com> wrote:

Have started on the exhaust. Made all three primaries 2" double slip joints (that alone took almost a whole day with welder). The big can (CA - Centrifugal Accumulator) rolled into a 5" can and we'll secure it to the engine with straps.

The inside pipe is 2.75" which has an area of 5.94sq". I'm not sure if there's a magic number, but all the holes I drilled equaled to just under double the area (11sq"). Most are 3/8, but I did add some 1/2 to get the total area up. Could we get away with drilling less holes? Not sure. I'll be able to drill out one side end of the CA and pull out the inner tube and change out. Will experiment later with less holes and monitor back pressure. Will weld a npt bung on the CA and use the wideband bung to measure the different.

The previous exhaust with just an Aero Turbine 2525XL, measured ~113dBA. With nothing, was closer to 120dBA. Funny around 2000 prop rpm was louder then at 2300 full static. 

Error! Filename not specified.

 

- Matt Boiteau

On 2020-01-07 12:19:23 AM, Matt Boiteau mattboiteau@gmail.com <flyrotary@lancaironline.net> wrote:

Okay I'll make all 3 primary tubes (2" diameter) all double slip fit. Welding batwing tabs (picture below) on to either side on the slips, will hold the muffler to the header but allow expansion.

 

Having troubles finding 2.75" bends in 321, so I might have to just switch to 3" downpipe that is more common. Vband clamp before downpipe for easier removal and under the plane to allow adding additional exhaust setups (long pipe with holes drilled in it, fishmouth tailpipe, etc)


I found a company that makes flex bellows in 321. I'm just not sure if I should have it vertical on the downpipe or close to the muffler horizontal before the first 90degree bend downwards.
https://www.aceraceparts.com/products/3-000-flex-bellow-assembly-321-stainless?variant=11067135556

Error! Filename not specified.

 

 

Batwing tabs

Error! Filename not specified.

 

- Matt Boiteau

On 2020-01-03 4:22:18 PM, Neil Unger 12348ung@gmail.com <flyrotary@lancaironline.net> wrote:

Mat,

                  As usual I have no idea.  I made all 3 slip joints and to date no grief in that area.  I am coming around to the stock manifold in some way.  Yes it is heavy, but appears to muffle the noise as well.  Know of 2 installations that use the stock manifold with a simple muffler after and both claim "acceptable" noise. It appears that the stock manifold has a big influence on noise??  Would prefer a DB reading, but if not available it is what it is.  All is compromise, weight, cost, time, but at the end of the day it has to work. 

Still working on the turbo even though the world is on holidays.  All to save my hearing.  So far the rotary is definitely "unique" as far as a turbo is concerned.  The heat generated exceeds all else  Two things to date -- special exhaust wheel and water cooled bearing body =, all for heat.  Have modified the stock front plate on the renesis to take an electric water pump.  That is the simple bit.

Neil.

On 1/4/2020 5:37 AM, Matt Boiteau mattboiteau@gmail.com wrote:

okay I found a good company called SPD Exhaust. They have everything you need in 321ss.

With the engine being an RX8, we have three exhaust ports. Should I weld the front and back solid to the muffler, and make the middle one a slip fit for expansion? Or vice-vesa?

Error! Filename not specified.

 

- Matt Boiteau

On 2019-12-28 11:03:42 AM, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:

I did something similar with my RV-3 13B decades ago. It split open at the welds around one of the pipes from the manifold into the the big outer tube True, it did use individual manifold base plates, not the connected factory manifold and the big tube was only 0.035.

Still, I would recommend slip joints on two of the three pipes, like I added on one of the pipes (cut through and a surrounding bigger pipe -- missing in picture).

Error! Filename not specified.

Can't remember why I went from the above to individual runners into a perforated pipe under the fuselage. Probably got lured by promise of increased power by tuned lengths and still uncomfortable by the muffler being inside the cowling.

Finn

On 12/28/2019 12:10 AM, Matt Boiteau mattboiteau@gmail.com wrote:

This is what I'm going to try in a few weeks. 

"Exhaust valve opens and a pulse of hot gas puffs out through a short pipe, then tangentially into a cylindrical canister. Being tangential, the pulse flattens out and travels helically (rather than bouncing and reverberating around) along the inside curved wall of the can, spiraling toward the exit, where it comes out more uniform in flow and so pretty quiet."

 

Outer pipe = 321 ss 0.050 thick. Flat plate bent to a 5" tube

Inner pipe = 321 ss 0.036 thick. 2.5" diameter

(I might use 302ss 0.065 since I already have it)

 

>From my understanding, the area of the holes should be double the area of the inner pipe. 

 

- Matt Boiteau

 

 

Disclaimer

The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.

--
Homepage:  http://www.flyrotarycom/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html



Virus-free. www.avast.com


--------------5C102EEADA64C575C6A40260--