I used a Texaco fleet oil for two hours at 2000 RPM. Then dump the oil and check the filter paper for metal.

Then 40 or 50 weight Redline racing oil. Never over 180 degrees on the coolant.  Then a lap at part throttle then good for 9,600 RPM at full throttle. No oil related failures in 35 years of racing.

You could do 4 hours at 2000 RPM no load or part load on fleet oil. Should be plenty. Never over 180 degrees.

It worked for me...............Lynn E. Hanover

In a message dated 6/27/2020 10:00:22 AM Eastern Standard Time, flyrotary@lancaironline.net writes:

So I Googled break-in procedures for the RX8.

Less than 4000RPM for the first 600-1000 miles.

I don't see that happening. I don't think I can keep the RV-4 level at

less than 4,500 RPM, depending on prop.

And I sure want full power at takeoff and climb to pattern altitude.

I guess I could run it on the ground for 10 hours at varying RPMs below

4000, but really?

What did you do with a new Renesis?

Finn

---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

--

Homepage:  http://www.flyrotary.com/

Archive and UnSub:  http://mail.lancaironline.net:81/lists/flyrotary/List.html