Mailing List flyrotary@lancaironline.net Message #65939
From: Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: EC3 hardware notes
Date: Wed, 24 Jun 2020 20:37:33 +0800
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Hi Finn

Both A & B chips erased, verified blank, reprogrammed (EC3CL8.HEX 17/06/2020), verified and checked program and config memory.
All looks right.
So after flying tomorrow on the EC2, I’ll see about swapping in the EC3 and see if she runs!
I’ll let you know how we go.

Thanks Finn

Steve

> On 24 Jun 2020, at 7:52 pm, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:
>
> Hi Finn
>
> ok. Now I recall you mentioning this recently but misunderstood.
> Sorry I haven’t read all your emails carefully enough having done the work with tracy.
>
> Good news for this EC3, that being the case.
> I’ll see if I have enough time tonight to reprogram the chips as I’m headed down tomorrow and could test the new code.
>
> I tried to pick up some 2.7v zeners today, but they only had 3.3v in single units and 2.7v by the 1000!
>
> So the full wave clipping circuit you supplied should clip the CAS signal to Zener voltage + forward volt drop of the other zener.
> 2.7+~0.7 = 3.4v. If I use the 3.3v it would clip the signal at 3.3+~0.7=4v. My analog amp knowledge is woefully lacking these days
> but I thought this extra 0.6v would be fine for Tracy’s conditioning circuits.
> Appreciate any analog insights you can offer re those signal conditioning amplifier/buffers?
>
> Cheers
>
> Steve Izett
>
>
>
>
>
>
>
>> On 24 Jun 2020, at 6:27 pm, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
>>
>> Steve,
>>
>> It will NOT run programmed for Renesis and LS2 coils unless you reprogram the chips using the source code I uploaded on the 17th of June:
>>
>> "Here it is:
>> https://drive.google.com/drive/folders/1mVzPOxUwcGUlPizxnRF40nUyKBzfT4DC?usp=sharing
>> It's EC3closedloop.zip."
>>
>> Finn
>>
>> On 6/23/2020 6:23 PM, Stephen Izett stephen.izett@gmail.com wrote:
>>> Hi Finn
>>>
>>> Sorry, I misunderstood. Too many things on my mind at work at present.
>>>
>>> When I get to the EC3 mods I’ll:
>>> a. Test the EC3 with new clamped CAS input. If no change and it still runs like a dog on two legs  -
>>> b. I’ll reprogram the chips with your hex code and retest.
>>>
>>> On another note:
>>> Still trying to decide on whether to pay to have my 4 blue secondary injectors cleaned and tested or
>>> buy new injectors, New ones are cheaper on eBay but are they knock offs that I shouldn’t trust?
>>> Cleaning is $40 each. New ones are $20 each!
>>>
>>> Cheers
>>>
>>> Steve Izett
>>>
>>>
>>>
>>>
>>>
>>>> On 24 Jun 2020, at 12:04 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
>>>>
>>>> Oh, you already reprogrammed them with the fixed code I uploaded?
>>>>
>>>> Finn
>>>>
>>>> On 6/23/2020 10:44 AM, Stephen Izett stephen.izett@gmail.com wrote:
>>>>> Thanks Finn.
>>>>>
>>>>> I’ll add the 2 zeners to the EC3 and test it.
>>>>> I thought the reprogramming of the chips was right.
>>>>> MPLABS reported them to be good.
>>>>>
>>>>> Steve
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>> On 23 Jun 2020, at 9:56 pm, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
>>>>>>
>>>>>> Attached is an excerpt of the EC3 CAS input conditioning circuit without added clamping circuit and with.
>>>>>>
>>>>>> Finn
>>>>>>
>>>>>> On 6/22/2020 10:02 PM, Stephen Izett stephen.izett@gmail.com wrote:
>>>>>>> Thanks Finn. Did you previously give us a the circuit? Do you have a sketch of it?
>>>>>>> I’ll mod the EC3 and see if that is the problem.
>>>>>>>
>>>>>>> Cheers
>>>>>>>
>>>>>>> Steve Izett
>>>>>> <EC3 CAS input with clamp.pdf><EC3 CAS input.pdf>--
>>>>>> Homepage:  http://www.flyrotary.com/
>>>>>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>>> --
>>>>> Homepage:  http://www.flyrotary.com/
>>>>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>>>
>>>>
>>>> --
>>>> Homepage:  http://www.flyrotary.com/
>>>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>
>>> --
>>> Homepage:  http://www.flyrotary.com/
>>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>>
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster