flyrotary@lancaironline.net Mailing List Archive

Hi Finn Sorry, I misunderstood. Too many things on my mind at work at present. When I get to the EC3 mods I’ll: a. Test the EC3 with new clamped CAS input. If no change and it still runs like a dog on two legs - b. I’ll reprogram the chips with your hex code and retest. On another note: Still trying to decide on whether to pay to have my 4 blue secondary injectors cleaned and tested or buy new injectors, New ones are cheaper on eBay but are they knock offs that I shouldn’t trust? Cleaning is $40 each. New ones are $20 each! Cheers Steve Izett > On 24 Jun 2020, at 12:04 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote: > > Oh, you already reprogrammed them with the fixed code I uploaded? > > Finn > > On 6/23/2020 10:44 AM, Stephen Izett stephen.izett@gmail.com wrote: >> Thanks Finn. >> >> I’ll add the 2 zeners to the EC3 and test it. >> I thought the reprogramming of the chips was right. >> MPLABS reported them to be good. >> >> Steve >> >> >> >> >>> On 23 Jun 2020, at 9:56 pm, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote: >>> >>> Attached is an excerpt of the EC3 CAS input conditioning circuit without added clamping circuit and with. >>> >>> Finn >>> >>> On 6/22/2020 10:02 PM, Stephen Izett stephen.izett@gmail.com wrote: >>>> Thanks Finn. Did you previously give us a the circuit? Do you have a sketch of it? >>>> I’ll mod the EC3 and see if that is the problem. >>>> >>>> Cheers >>>> >>>> Steve Izett >>> >>> <EC3 CAS input with clamp.pdf><EC3 CAS input.pdf>-- >>> Homepage: http://www.flyrotary.com/ >>> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >> > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html