Hi Finn
Interesting.
Where is this data dump on the EM3?
I can’t find it in my documentation.

Steve

> On 29 May 2020, at 7:18 pm, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
>
> On 5/29/2020 4:32 AM, Stephen Izett stephen.izett@gmail.com wrote:
>> Hi Finn.
>> At Charlies request, I’m happy for us to keep the discussion public.
>> I hadn’t used the EM3 Engine Dump screen. Must check it out.
>> So I guess with a Renesis CAS but timing for a 3 rotor ignition and injectors it might run like a Harley!
>>
>> So did the compiler get the equates wrong, or more likely the chips didn’t erase properly if it was previously progged for a 20B?
>> Worth checking the source for any semicolons etc in the wrong place in the list of EQU’s.
>> Did MPLABS read and confirm the burns?
>> Do you know what engine the EC3 was previously set up for?
>>
>> Steve
> This is a brand new EC3 board and new virgin chips.
>
> Checked the compile listing and:
>   000000A8            01194 ENG                     EQU     0xA8 ;PUT ENGINE TYPE CODE HERE AND CHECK **** ALL **** FLAGS BELOW!!
> so something else in the program is changing it from this constant value to B0.
>
> Finn
>
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html