|
|
On 5/29/2020 4:32 AM, Stephen Izett stephen.izett@gmail.com wrote:
Hi Finn.
At Charlies request, I’m happy for us to keep the discussion public.
I hadn’t used the EM3 Engine Dump screen. Must check it out.
So I guess with a Renesis CAS but timing for a 3 rotor ignition and injectors it might run like a Harley!
So did the compiler get the equates wrong, or more likely the chips didn’t erase properly if it was previously progged for a 20B?
Worth checking the source for any semicolons etc in the wrong place in the list of EQU’s.
Did MPLABS read and confirm the burns?
Do you know what engine the EC3 was previously set up for?
Steve
This is a brand new EC3 board and new virgin chips.
Checked the compile listing and:
000000A8 01194 ENG EQU 0xA8 ;PUT ENGINE TYPE CODE HERE AND CHECK **** ALL **** FLAGS BELOW!!
so something else in the program is changing it from this constant value to B0.
Finn
|
|