flyrotary@lancaironline.net Mailing List Archive

Add ignition to that. 🤕 renesis (04) Rich Sent from my iPhone > On May 23, 2020, at 11:30 AM, A R Goldman argoldman@aol.com <flyrotary@lancaironline.net> wrote: > > Greetings all > > Anybody know the total current draw for Tracy’s EC-3 including efi,injectors, pump, etc at about 7-8 k. Rpm? > > Thanks > > Rich > > Sent from my iPhone > >> On May 21, 2020, at 8:16 PM, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote: >> >> Well, after several hours of Murphy working overtime, I finally was able to get the wiring on my EC3 chip programming board right, chips programmed and EC3 installed. >> >> Flux capacitor fluxing, injectors clicking and spark plug firing. >> >> Time to get the wheels on and roll it out and start the engine. >> >> Oh, wait, guess I need to finish and install the prop :( >> >> Finn >> >> >>> On 5/21/2020 9:23 AM, Finn Lassen finn.lassen@verizon.net wrote: >>> 1) Without prop any vibration will be from engine and PSRU and can inspect engine (leaks, etc.) with no fear of prop. >>> >>> 2) With prop less chance of over rev and some cooling air through rads and oil cooler. >>> >>> What do you think? >>> >>> Finn >>> >>> >>> >>> -- >>> Homepage: http://www.flyrotary.com/ >>> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >>> >> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html