flyrotary@lancaironline.net Mailing List Archive

Great work Finn Could I get the MPLABs version your using and any more info for the build. I could build and program and confirm the burn but the EC3 ran like a dog. Steve > On 22 May 2020, at 9:16 am, Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote: > > Well, after several hours of Murphy working overtime, I finally was able to get the wiring on my EC3 chip programming board right, chips programmed and EC3 installed. > > Flux capacitor fluxing, injectors clicking and spark plug firing. > > Time to get the wheels on and roll it out and start the engine. > > Oh, wait, guess I need to finish and install the prop :( > > Finn > > > On 5/21/2020 9:23 AM, Finn Lassen finn.lassen@verizon.net wrote: >> 1) Without prop any vibration will be from engine and PSRU and can inspect engine (leaks, etc.) with no fear of prop. >> >> 2) With prop less chance of over rev and some cooling air through rads and oil cooler. >> >> What do you think? >> >> Finn >> >> >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >> > > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html