X-Junk-Score: 0 [] X-Cloudmark-Score: 0 [] X-Cloudmark-Analysis: v=2.3 cv=BpPjPrf5 c=1 sm=1 tr=0 a=sKqYCCtfdo6i1pPlkZuWCw==:117 a=jpOVt7BSZ2e4Z31A5e1TngXxSK0=:19 a=l697ptgUJYAA:10 a=EuBU2_5BM3oA:10 a=r77TgQKjGQsHNAKrUKIA:9 a=UKPAHat8AAAA:8 a=Ia-xEzejAAAA:8 a=VAMm1qzQAAAA:8 a=jThZ7_-JAAAA:8 a=qDekDU7deUCFY-KmhZ8A:9 a=QEXdDO2ut3YA:10 a=4PR2P7QzAAAA:8 a=3xtxbcn8FL31EWZMBmgA:9 a=LwkvnJyRN3wa1cZu:21 a=UiCQ7L4-1S4A:10 a=hTZeC7Yk6K0A:10 a=frz4AuCg-hUA:10 a=_W_S_7VecoQA:10 a=Fc6xXSS-RxGHxrvp76Qp:22 a=Urk15JJjZg1Xo0ryW_k8:22 a=NVbvhy2gKIdozzgvQOKv:22 a=4dqwQCo7Po2mVW515mGf:22 From: "Finn Lassen finn.lassen@verizon.net" Received: from sonic310-24.consmr.mail.ne1.yahoo.com ([66.163.186.205] verified) by logan.com (CommuniGate Pro SMTP 6.2.14) with ESMTPS id 13470662 for flyrotary@lancaironline.net; Mon, 10 Feb 2020 14:11:21 -0500 Received-SPF: pass receiver=logan.com; client-ip=66.163.186.205; envelope-from=finn.lassen@verizon.net DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=verizon.net; s=a2048; t=1581361864; bh=kjDXiJd2hsqdkJHbzWQdj3vZNEnEuM/2w7+UjvPU9ug=; h=Subject:To:References:From:Date:In-Reply-To:From:Subject; b=RpUZpk6hp+y5/VMJDQ83yc2TSQlmaq0WD2tOCXhoZivXy33S6sI3R6T1auClMXfbS41CeRP0smA2B1KG4tQuvfe4aZOqAFIYBe9jf5mngZc62InUsaROhdOt2TI4VWjec37ZFaF+pVDY6OqQEeFlWA5Wd4YPiBwn36bad32381atQzNPaUP2QvWt31/PP8e4a2bGeTIBqRspv21XTc2cdLdg9YPHg7VtIxk+6Xt9xP79CrsujD8Ykk8zk52FKu1WCP2VJ3fG7oB2y3JdYQiV6XCcXu9ruj8WIcezpPL5QW4lmn0o//cy0Ak9p6rrSoC7D1NZp6KR4AWqx71EQAlsnw== X-YMail-OSG: _KiErlIVM1muO7SASb0_VOPDcHsKWDyrQn47QD9h_QVQAL3YO5gNH9SgI_kuNLl qPfY.LS5c6hnWShddBH1WSQb014erB_IgNGjnCqC5EjsAHpE0A2J7XYOuz7EezrvOnPG2xeMdcaX WGefERgJ9ZENNZHH_Npr85Sdwyo6L24kr4yHIbvkNCSotKKCpK8RR9dEELP5bN95tSoU1dl4fMZq D0dHvTvemNp6YC1yVjiTMCjY9yVPqPU_rNYnQLOHDcP_bckl6b9_LPrc5r2reeU1ml8f0Gs5juaC _KsqzLUctxbyWcQUCNoSH6LN0himQVYTa9ClOa7JRD03EGmx5DD8VorYxBZKb8zumVY7NyzcPFCY r5SfQP2zYKsQQ7dNUtFydRjOb.zsK7Lp2Wwm06VH4mG7eYucv4LEpHaIKwBoHykjzOQADpoJjR3p PIn_wPIkB4gsEfv0iZp7BaMjFUG9lNojuDZ85xOBdrXU6Mc6j95QnDl9yvYqBwYx9AGd383u7A7z ZjowuETL97RSLWsY3ei3jfsozb9hrbAZcRJBZaVNAV_a.EhUAz7rVrIqH6WCUvfgp.g4OXG0L2AY Qw7_kCqUeeSnvleIvyj_i.Hap4577H6nIJI1gPNjPuQmBBJcDktDHocSTr.P4RbjQjHnkxaM5ImI ON8Td6IZciSdjsBPaizH55QPOThfzVDVarnt6mBPXqLf26_Zpya2fiKZ76puL6J4kpW_F86lUfV1 TX7TwCm4hcojcMhANBqO1Jz7RfKQqRbEbAcv89FiLffDdk6QPBRIruq.A8k3i8grQM94HpVJq5sK Kz_jlaCFWEQHFtY.VsexKV5Snl2ZWVJrcz0DvUEyP_l88FQAbgGA.gcy9jvy_YYbyAX9JsyXaRzX CpAVPVKabPxJHSMtDEBcmvEYd7z1FnJu1cUL1OlFOOEkbxjakwjsozexALWPth_XOpZzlG9YxxkO 762vZTdpHOWI_1jxuoW2tlbIsXuUXb.ca1oQR_gcffeexdnA1K02_ltc0LmINaRAnTIyB1B02It1 5HwlVWEbAsAuIJbNOpDPLIqXAFXdLUYzUJqZUz.WH0QdgdOz92YfMeNnPkllACYId1fbyVdglszV TuPoPK96_y6bOb_J8MYKhmCaQGP3cnYOmr62eYSaIVwC1Nz1YOq10qIPixCjNKWNTIZDVEBva.da tiuGc3iFtgeY.BZ2GPFc6ThuwdXFdI9HhmUOdInOaG2xp7yEjYfapc6T8IMgfbEjsQWUk0mN28y8 cFwFWia4T4GyrpROdxFnWnoCAjF8wI_Bw5NZp2hZFttwuQHGC3GjbzlwNz_N0yoaV63TPiNE.7bs PPSisujOyHgDA8ujH6BDY54Xc7XO4n3LAX87NeTq0iO8I_nUjgD9HiyOkh5OpDHTrmUobTiWo Received: from sonic.gate.mail.ne1.yahoo.com by sonic310.consmr.mail.ne1.yahoo.com with HTTP; Mon, 10 Feb 2020 19:11:04 +0000 Received: by smtp418.mail.bf1.yahoo.com (Oath Hermes SMTP Server) with ESMTPA ID cf9b6ce756a16b2b66a195ab76224e50; Mon, 10 Feb 2020 19:11:00 +0000 (UTC) Subject: Re: [FlyRotary] Re: Cleaning out the Garage - it's really going to happen. To: Rotary motors in aircraft References: Message-ID: <4676b558-f9ad-90d2-e0bb-58fbe2a45366@verizon.net> Date: Mon, 10 Feb 2020 14:10:58 -0500 User-Agent: Mozilla/5.0 (Windows NT 5.1; rv:52.0) Gecko/20100101 Thunderbird/52.9.1 MIME-Version: 1.0 In-Reply-To: Content-Type: multipart/alternative; boundary="------------D86CA4495384AF50AC8DA857" Content-Language: en-US X-Mailer: WebService/1.1.15199 hermes Apache-HttpAsyncClient/4.1.4 (Java/1.8.0_181) Content-Length: 17718 This is a multi-part message in MIME format. --------------D86CA4495384AF50AC8DA857 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 8bit Really would be a petty if any of those items went to waste. But I'm not going to Austin to pick them up. Would you ship the mount plane and heat exchangers for a price? Finn On 2/10/2020 10:49 AM, Bobby J. Hughes bhughes@qnsi.net wrote: > > I’m really going to clean the garage out this time. The following > items are free if you come pick them up. They are going in the trash > if no one needs them. > > 1. RV8 engine mount with aluminum plate bed mount. > > 2.Sam James rotary cowl. This was installed and flown. Intake hole may > be in the wrong location. Lower cowl may have been modified for heat > changer exit / cowl flap. > > 3.Tech Welding heat exchangers. A double pass (front to rear) coolant > exchanger. Not sure if oil cooler is single or double pass. I believe > this is the same setup that Sam Hodges is flying in his RV7 and > cooling well. The fiberglass ducts are bonded to the heat exchangers > so they would need to be cleaned up if used in another location. > > Bobby > > *From:*Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] > *Sent:* Friday, June 29, 2018 11:13 AM > *To:* Rotary motors in aircraft > *Subject:* [FlyRotary] Cleaning out the Garage > > I’ve accumulated too much rotary stuff and need to free up space to > continue building my new turbo Renesis FWF. I purchased a RV8 Renesis > FWF a few years back for the engine and gearbox. I’m keeping those > items but need to clean out the rest. > > The following items need to go. I still need to take a few pictures. > > 1. RV8 engine mount with aluminum plate bed mount. > > 2.Sam James rotary cowl. This was installed and flown. Intake hole may > be in the wrong location. Lower cowl may have been modified for heat > changer exit / cowl flap. > > 3.Tech Welding heat exchangers. A double pass (front to rear) coolant > exchanger. Not sure if oil cooler is single or double pass. I believe > this is the same setup that Sam Hodges is flying in his RV7 and > cooling well. The fiberglass ducts are bonded to the heat exchangers > so they would need to be cleaned up if used in another location. > >        Intake manifold is a very poor design but may have usable parts. > > $1000.00 or best offer but you have pick it up in Austin. > > I also have a fuel trailer that needs to go. I use it for mogas but it > should not be stored in my hanger. We usually get advanced notice of > hanger inspections and it has to be removed during that time. It’s > about 50 gallons with good tires and buddy bearings. The nozzle works > but needs to be rebuilt or a new one for about $25.00.  Good battery.  > I purchased it from Mark Steitle for $350 and he purchased for the > same amount from someone else on field. The trailer is not licenses > and does not have lights. – I’ve purchased a new truck and plan to > install a transfer tank soon for added convenience. > > Don’t understand why my wife insists on parking her mustang in the garage? > > Bobby Hughes > > RV10 SC Renesis > > Closing in on 500 hrs. > > https://www.dropbox.com/sh/41hrm00tyqapp0s/AAAiusuG0BHTJy9inZujGj-Va?dl=0 > > > > *Disclaimer* > > The information contained in this communication from the sender is > confidential. It is intended solely for use by the recipient and > others authorized to receive it. If you are not the recipient, you are > hereby notified that any disclosure, copying, distribution or taking > action in relation of the contents of this information is strictly > prohibited and may be unlawful. > > This email has been scanned for viruses and malware, and may have been > automatically archived by *Mimecast Ltd*, an innovator in Software as > a Service (SaaS) for business. Providing a *safer* and *more useful* > place for your human generated data. Specializing in; Security, > archiving and compliance. To find out more Click Here > . > --------------D86CA4495384AF50AC8DA857 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 8bit
Really would be a petty if any of those items went to waste. But I'm not going to Austin to pick them up.

Would you ship the mount plane and heat exchangers for a price?

Finn

On 2/10/2020 10:49 AM, Bobby J. Hughes bhughes@qnsi.net wrote:

I’m really going to clean the garage out this time. The following items are free if you come pick them up. They are going in the trash if no one needs them.

 

1.       RV8 engine mount with aluminum plate bed mount.

2.      Sam James rotary cowl. This was installed and flown. Intake hole may be in the wrong location. Lower cowl may have been modified for heat changer exit / cowl flap.

3.      Tech Welding heat exchangers. A double pass (front to rear) coolant exchanger. Not sure if oil cooler is single or double pass. I believe this is the same setup that Sam Hodges is flying in his RV7 and cooling well. The fiberglass ducts are bonded to the heat exchangers so they would need to be cleaned up if used in another location.

Bobby

 

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Friday, June 29, 2018 11:13 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Cleaning out the Garage

 

 

I’ve accumulated too much rotary stuff and need to free up space to continue building my new turbo Renesis FWF. I purchased a RV8 Renesis FWF a few years back for the engine and gearbox. I’m keeping those items but need to clean out the rest.

 

The following items need to go. I still need to take a few pictures.

 

1.       RV8 engine mount with aluminum plate bed mount.

2.      Sam James rotary cowl. This was installed and flown. Intake hole may be in the wrong location. Lower cowl may have been modified for heat changer exit / cowl flap.

3.      Tech Welding heat exchangers. A double pass (front to rear) coolant exchanger. Not sure if oil cooler is single or double pass. I believe this is the same setup that Sam Hodges is flying in his RV7 and cooling well. The fiberglass ducts are bonded to the heat exchangers so they would need to be cleaned up if used in another location.

       Intake manifold is a very poor design but may have usable parts.

 

$1000.00 or best offer but you have pick it up in Austin.

 

I also have a fuel trailer that needs to go. I use it for mogas but it should not be stored in my hanger. We usually get advanced notice of hanger inspections and it has to be removed during that time. It’s about 50 gallons with good tires and buddy bearings. The nozzle works but needs to be rebuilt or a new one for about $25.00.  Good battery.  I purchased it from Mark Steitle for $350 and he purchased for the same amount from someone else on field. The trailer is not licenses and does not have lights. – I’ve purchased a new truck and plan to install a transfer tank soon for added convenience.

 

Don’t understand why my wife insists on parking her mustang in the garage?

 

 

Bobby Hughes

RV10 SC Renesis

Closing in on 500 hrs.

 

https://www.dropbox.com/sh/41hrm00tyqapp0s/AAAiusuG0BHTJy9inZujGj-Va?dl=0

 

 



Disclaimer

The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

This email has been scanned for viruses and malware, and may have been automatically archived by Mimecast Ltd, an innovator in Software as a Service (SaaS) for business. Providing a safer and more useful place for your human generated data. Specializing in; Security, archiving and compliance. To find out more Click Here.


--------------D86CA4495384AF50AC8DA857--