Not a timing issue directly,however—

I have Tracy’s ec3 for my renesis. The wiring diagram indicates an input for two CASs however in my rapidly fading memory I seem to remember that only one CAS can be used. Is that correct or can it read  two 180 degrees off set.

Thanks, Rich

Sent from my iPhone

> On Jan 25, 2020, at 6:25 PM, Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net> wrote:
>
> Hi guys
>
> My apologies, I think Ive asked this some years back, and I’ve had trouble searching the archive, not sure why!
>
> Lynn has talked from memory about the importance of knowing the timing.
> So much appreciate your input Lynn over the years, and sorry for the times I haven’t listened carefully.
>
> Tracy’s A8 Renesis base timing setup has always run well.
> But now as we are extending the envelope I’m interested in what others with Renesis engines/CAS have done with their timing.
>
> Can anyone with EC2/3 A8 and Renesis CAS comment on any timing adjustments that have made to the base settings.
>
> Thanks
>
> Steve Izett
>
>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html