Mailing List flyrotary@lancaironline.net Message #63791
From: Stephen Izett stephen.izett@gmail.com <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Thermostat Housing
Date: Wed, 27 Dec 2017 22:13:29 +0800
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Thanks Jeff
Steve

> On 27 Dec 2017, at 9:20 pm, Jeff Whaley jwhaley@datacast.com <flyrotary@lancaironline.net> wrote:
>
> Hi Steve, along with having a hole in the thermostat you should also have an air bleed at the highest point in the water system.  I have 2 - one is attached to a hose connector in the rear housing just behind the re-drive - the other is at the top of my water pump outlet; both use 3/8 hose with plugs drilled to 1/8 inch and they tee at the bottom of my small expansion tank.
> Jeff - Wishing all the best in 2018.
> Sent from my BlackBerry® phone powered by Koodo Mobile®.
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster