X-Virus-Scanned: clean according to Sophos on Logan.com
From: <flyrotary@lancaironline.net>
Received: from omr-m009e.mx.aol.com ([204.29.186.8] verified)
by logan.com (CommuniGate Pro SMTP 6.2c1)
with ESMTPS id 9605401 for flyrotary@lancaironline.net; Fri, 24 Mar 2017 13:35:23 -0400
Received-SPF: pass
receiver=logan.com; client-ip=204.29.186.8; envelope-from=Lehanover@aol.com
Received: from mtaomg-aak02.mx.aol.com (mtaomg-aak02.mx.aol.com [172.27.2.228])
by omr-m009e.mx.aol.com (Outbound Mail Relay) with ESMTP id 4E8EE380008E
for <flyrotary@lancaironline.net>; Fri, 24 Mar 2017 13:35:03 -0400 (EDT)
Received: from core-mda04e.mail.aol.com (core-mda04.mail.aol.com [172.27.39.4])
by mtaomg-aak02.mx.aol.com (OMAG/Core Interface) with ESMTP id E8F6838000082
for <flyrotary@lancaironline.net>; Fri, 24 Mar 2017 13:35:02 -0400 (EDT)
Full-name: Lehanover
Message-ID: <f975e.341bdfd9.4606b2c6@aol.com>
Date: Fri, 24 Mar 2017 13:35:02 -0400
Subject: Re: [FlyRotary] Re: more redrive questions
To: flyrotary@lancaironline.net
MIME-Version: 1.0
Content-Type: multipart/alternative; boundary="part1_f975e.341bdfd9.4606b2c6_boundary"
X-Mailer: AOL 9.7 sub 19
X-Originating-IP: [97.97.209.151]
x-aol-global-disposition: G
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com;
s=20150623; t=1490376903;
bh=G/KVCdaIEBHHtDSHs1bZgrRC+iQZmCHwmSkQ6Rtu4BA=;
h=From:To:Subject:Message-ID:Date:MIME-Version:Content-Type;
b=qxxzTH6UHxPFwQrRUdJOwbplwTx8g+0A8npNmXarNFM5ZiitqibYOn9Dgn8XJkVtC
0ZBlj/Ru/Qor3FdO30EnYtXkzaQW+o4pkscvmvDeXb+TMpu1HNvAzMjPayln0hKPND
WrfIuA7t5ZQOmHrCTzuchwJ/zCrWfDg1Jw4V1rKw=
x-aol-sid: 3039ac1b02e458d558c61a52
--part1_f975e.341bdfd9.4606b2c6_boundary
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Content-Language: en
When changing gears in a Hewland transmission we used gasoline on a rag to=
=20
wipe off the Blue Hylomar used to seal the rear cover on the trans. Good=
=20
against hot gear oil.
Gasoline, not so much.
Lynn E. Hanover=20
=20
=20
In a message dated 3/23/2017 5:41:00 P.M. Eastern Daylight Time, =20
flyrotary@lancaironline.net writes:
=20
Locktite 515or Locktite 510 =E2=80=93 I have used both. 510 has a higher=
=20
temperature operating range. 400F vs 300F. Just don=E2=80=99t get to muc=
h if any on the=20
long =C2=BC=E2=80=9D bolts. Makes them very hard to back out. Once the bo=
lts are removed=20
only a light tap with a rubber mallet is required. A little goes a long=
way=20
so don=E2=80=99t over fill. Any squeeze out on the exterior will also be=
on the=20
inside. It will harden into a solid ring and looks really strange the fir=
st=20
time you dissemble. =20
Bobby=20
=20
=20
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]=20
Sent: Thursday, March 23, 2017 5:08 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: more redrive questions
=20
=20
=20
In a message dated 3/23/2017 4:03:48 P.M. Central Daylight Time,=20
_flyrotary@lancaironline.net_ (mailto:flyrotary@lancaironline.net) write=
s:
=20
=20
=20
3. When you do get 'em apart, there are sealants that don't harden...
=20
=20
Charlie
=20
Hylomar???
=20
=20
Rich
=20
=20
--part1_f975e.341bdfd9.4606b2c6_boundary
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
Content-Language: en
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:o =3D "urn:schemas-microsoft-com:office:office"><HEAD>
<META content=3D"text/html; charset=3DUTF-8" http-equiv=3DContent-Type>
<META name=3DGENERATOR content=3D"MSHTML 11.00.9600.18618"></HEAD>
<BODY id=3Drole_body style=3D"FONT-SIZE: 12pt; FONT-FAMILY: Arial; COLOR:=
#000000"=20
bottomMargin=3D7 leftMargin=3D7 rightMargin=3D7 topMargin=3D7><FONT id=3Dr=
ole_document=20
color=3D#000000 size=3D3 face=3DArial>
<DIV>When changing gears in a Hewland transmission we used gasoline on a=
rag to=20
wipe off the Blue Hylomar used to seal the rear cover on the trans. Good=
against=20
hot gear oil.</DIV>
<DIV>Gasoline, not so much.</DIV>
<DIV>Lynn E. Hanover </DIV>
<DIV> </DIV>
<DIV>
<DIV>In a message dated 3/23/2017 5:41:00 P.M. Eastern Daylight Time,=20
flyrotary@lancaironline.net writes:</DIV>
<BLOCKQUOTE=20
style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"=
><FONT=20
style=3D"BACKGROUND-COLOR: transparent" color=3D#000000 size=3D2 face=3D=
Arial>
<DIV class=3DWordSection1>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 11pt; FONT-FAMILY: "Calibri","sans-serif"; COLOR: #1=
f497d'>Locktite=20
515or Locktite 510 =E2=80=93 I have used both. 510 has a higher temperat=
ure operating=20
range. 400F vs 300F. Just don=E2=80=99t get to much if any on the=
long =C2=BC=E2=80=9D bolts.=20
Makes them very hard to back out. Once the bolts are removed only a ligh=
t tap=20
with a rubber mallet is required. A little goes a long way so don=E2=80=
=99t over fill.=20
Any squeeze out on the exterior will also be on the inside. It will hard=
en=20
into a solid ring and looks really strange the first time you dissemble.=
=20
<o:p></o:p></SPAN></P>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 11pt; FONT-FAMILY: "Calibri","sans-serif"; COLOR: #1=
f497d'><o:p> </o:p></SPAN></P>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 11pt; FONT-FAMILY: "Calibri","sans-serif"; COLOR: #1=
f497d'>Bobby<o:p></o:p></SPAN></P>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 11pt; FONT-FAMILY: "Calibri","sans-serif"; COLOR: #1=
f497d'><o:p> </o:p></SPAN></P>
<DIV>
<DIV=20
style=3D"BORDER-TOP: #b5c4df 1pt solid; BORDER-RIGHT: medium none; BORDE=
R-BOTTOM: medium none; PADDING-BOTTOM: 0in; PADDING-TOP: 3pt; PADDING-LEFT=
: 0in; BORDER-LEFT: medium none; PADDING-RIGHT: 0in">
<P class=3DMsoNormal><B><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Tahoma","sans-serif"'>From:</SPA=
N></B><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Tahoma","sans-serif"'> Rotary mo=
tors in=20
aircraft [mailto:flyrotary@lancaironline.net] <BR><B>Sent:</B> Thursday,=
March=20
23, 2017 5:08 PM<BR><B>To:</B> Rotary motors in aircraft<BR><B>Subject:<=
/B>=20
[FlyRotary] Re: more redrive questions<o:p></o:p></SPAN></P></DIV></DIV>
<P class=3DMsoNormal><o:p> </o:p></P>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'>In a=20
message dated 3/23/2017 4:03:48 P.M. Central Daylight Time, <A=20
title=3Dmailto:flyrotary@lancaironline.net=20
href=3D"mailto:flyrotary@lancaironline.net">flyrotary@lancaironline.net<=
/A>=20
writes:<o:p></o:p></SPAN></P></DIV>
<BLOCKQUOTE=20
style=3D"MARGIN-BOTTOM: 5pt; BORDER-TOP: medium none; BORDER-RIGHT: medi=
um none; BORDER-BOTTOM: medium none; PADDING-BOTTOM: 0in; PADDING-TOP: 0in=
; PADDING-LEFT: 4pt; MARGIN-LEFT: 3.75pt; BORDER-LEFT: blue 1.5pt solid;=
MARGIN-TOP: 5pt; PADDING-RIGHT: 0in">
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: bl=
ack'><BR> <o:p></o:p></SPAN></P></DIV>
<BLOCKQUOTE=20
style=3D"MARGIN-BOTTOM: 5pt; BORDER-TOP: medium none; BORDER-RIGHT: me=
dium none; BORDER-BOTTOM: medium none; PADDING-BOTTOM: 0in; PADDING-TOP:=
0in; PADDING-LEFT: 4pt; MARGIN-LEFT: 3.75pt; BORDER-LEFT: blue 1.5pt soli=
d; MARGIN-TOP: 5pt; PADDING-RIGHT: 0in">
<DIV>
<BLOCKQUOTE=20
style=3D"BORDER-TOP: medium none; BORDER-RIGHT: medium none; BORDER-=
BOTTOM: medium none; PADDING-BOTTOM: 0in; PADDING-TOP: 0in; PADDING-LEFT:=
6pt; MARGIN-LEFT: 4.8pt; BORDER-LEFT: #cccccc 1pt solid; PADDING-RIGHT:=
0in; MARGIN-RIGHT: 0in">
<DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR=
: black'>3.=20
When you do get 'em apart, there are sealants that don't=20
harden...<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR=
: #888888'><o:p> </o:p></SPAN></P></DIV></DIV></BLOCKQUOTE></DIV></BL=
OCKQUOTE>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: #8=
88888'>Charlie</SPAN><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: bl=
ack'><o:p></o:p></SPAN></P></DIV></BLOCKQUOTE>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'>Hylomar???<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'>Rich<o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'> <o:p></o:p></SPAN></P></DIV>
<DIV>
<P class=3DMsoNormal><SPAN=20
style=3D'FONT-SIZE: 10pt; FONT-FAMILY: "Arial","sans-serif"; COLOR: blac=
k'></SPAN> </P></DIV></DIV></FONT></BLOCKQUOTE></DIV></FONT></BODY></=
HTML>
--part1_f975e.341bdfd9.4606b2c6_boundary--