flyrotary@lancaironline.net Mailing List Archive

I used high temp silicon, because the exhaust heat was melting the nylon tubing that I used. On 07/13/2014 09:08 PM, Stephen Izett wrote: Hi Joe Ive used a silicon hose. Its flexible enough to stretch over larger barbs i have on the inlet manifold, yet its snug with the MAP sensor barbs on our EC2. It also has significant wall thickness so as not to collapse under high vacuum. I only ran one line ’t’ off inside the cabin to feed both EC MAP sensors and a Dynon MAP sensor. Cheers Steve Izett On 14 Jul 2014, at 8:45 am, Joseph Berki <flyrotary@lancaironline.net> wrote: What kind of tubing is everyone using for the manifold pressure connection to the EC-3? Thanks for any help Joe Berki -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html