From: "Ernest Christley" <flyrotary@lancaironline.net>
Received-SPF: none
 receiver=logan.com; client-ip=216.39.63.160; envelope-from=echristley@att.net
Message-ID: <53C34C33.4030203@att.net>
Date: Sun, 13 Jul 2014 23:19:15 -0400
Reply-To: echristley@att.net
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0
MIME-Version: 1.0
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Tubing
References: <list-6977055@logan.com>
In-Reply-To: <list-6977055@logan.com>
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 8bit

I used high temp silicon, because the exhaust heat was melting the nylon 
tubing that I used.

On 07/13/2014 09:08 PM, Stephen Izett wrote:
> Hi Joe
> Ive used a silicon hose. Its flexible enough to stretch over larger barbs i have on the inlet manifold, yet its snug with the MAP sensor barbs on our EC2. It also has significant wall thickness so as not to collapse under high vacuum.
> I only ran one line ’t’ off inside the cabin to feed both EC MAP sensors and a Dynon MAP sensor.
>
> Cheers
> Steve Izett
> On 14 Jul 2014, at 8:45 am, Joseph Berki <flyrotary@lancaironline.net> wrote:
>
>> What kind of tubing is everyone using for the manifold pressure connection to the EC-3?
>>
>> Thanks for any help
>>
>> Joe Berki
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
>