Received-SPF: pass
 receiver=logan.com; client-ip=75.180.132.120; envelope-from=eanderson@carolina.rr.com
Message-ID: <F360AFBEE01C41ABBEEA6D472FC7CE7C@EdPC>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-6055801@logan.com>
In-Reply-To: <list-6055801@logan.com>
Subject: Re: [FlyRotary] Re: Crickets & progress
Date: Mon, 11 Feb 2013 10:49:30 -0500
MIME-Version: 1.0
Content-Type: text/plain;
	format=flowed;
	charset="iso-8859-1";
	reply-type=original
Content-Transfer-Encoding: 7bit
Importance: Normal

Thanks, Steve

I'll see if I can find out more about it.   Ideally for my EFISM, I would 
like to just have the 0- 5 volt input to deal with.  An easy mod to the code 
with just that, but if I have to do the PID control for temps then that 
simply amounts to too much to incorporate into the code (or color me too 
lazy {:>))

Ed

--------------------------------------------------
From: "Steven W. Boese" <SBoese@uwyo.edu>
Sent: Monday, February 11, 2013 9:53 AM
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Crickets & progress

> Ed,
>
> The upstream sensor on the newer RX8's is called out as an air/fuel sensor 
> as opposed to the downstream sensor which is specified as an O2 sensor. 
> The mark on this upstream sensor is Denso 09M27-4350.  The Denso catalog 
> number is 234-9059.  It is a four wire sensor with two of the wires 
> apparently for a heater like a heated O2 sensor.  The output has a 5V 
> range from what I could find out.  So far, I have not been able to find 
> more specifics on this sensor, but it is possible that it is capable of a 
> more useful signal than the rapidly changing Nernstian signal of a 
> conventional O2 sensor when the mixture is stochiometric.  The sensor is 
> more expensive than the universal Bosch 11027 O2 sensor, but the Renesis 
> engine I got came with this upstream air/fuel sensor still installed in 
> the exhaust manifold.  If others have this sensor also, it is a 
> possibility that it could be used with minimal added expense.  Someone 
> with details of the RX8 emission system might be able to shed some light 
> on this.
>
> Steve Boese
> RV6A, 1986 13B NA, RD1A, EC2
>
> ________________________________________
> From: Rotary motors in aircraft [flyrotary@lancaironline.net] on behalf of 
> Ed Anderson [eanderson@carolina.rr.com]
> Sent: Monday, February 11, 2013 5:27 AM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: Crickets & progress
>
> Thanks for the suggestion, Ernest
>
> However, the cost of the wideband sensor kits I found approach (or are 
> more
> than) the total cost of the EFISM - so not feasible marketing wise.  But,
> who knows - there are a bunch of them out there and I have not done an
> exhaustive search - yet.
>
> Ed
>
> --------------------------------------------------
> From: "Ernest Christley" <echristley@att.net>
> Sent: Sunday, February 10, 2013 8:07 PM
> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
> Subject: [FlyRotary] Re: Crickets & progress
>
>>
>> On Feb 9, 2013, at 6:27 PM, Ed Anderson wrote:
>>
>>> Great to hear about your move to the wide band O2 sensor, Tracy.
>>>
>>> I looked into modifying the EFISM to do the same, but found the PID
>>> control supposedly necessary to precisely control the heater element of
>>> the wide band sensor to be much more complex than simply extending the
>>> voltage range to interpret the WB output.  Did you embed any PID control
>>> elements in the EC3 for temperature control - or just accepted any 
>>> small?
>>> error associated with temp variations?
>>>
>>> Ed
>>
>> Ed, look at the LS1 line of Innovate sideband sensors.  They have their
>> own computer that controls the heater, and it just puts out a 0-5V
>> corresponding to the F/A mixture.
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:
>> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2013.0.2897 / Virus Database: 2639/6087 - Release Date: 02/07/13
>>
>>
>
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub: 
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub: 
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2897 / Virus Database: 2639/6087 - Release Date: 02/07/13
>
>