|
|
Their web site says that they don’t
sell the plate by itself. You have to buy the entire mount.
Bill B
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of ARGOLDMAN@aol.com
Sent: Monday, January 21, 2013
4:04 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Moving
the starter from the bottom to the side
Although it is true that Tracy does not offer it,
the Cozy Girlls include the side mount as standard on their mount. (CG
products). Their rotary mount also has more reinforcements. Additionally
everything they make is of top quality.Take a look at their site. There is a
section just for rotaries.
In a message dated 1/21/2013 12:18:54
P.M. Central Standard Time, msteitle@gmail.com
writes:
Bill,
I moved mine to the 9 o'clock position
(plugs side) by building a whole new plate. Since the bell housing bolts
locate the center position, it requires very accurate locating of the holes as
does the center hole which has a counter-bore for the seal. I cut the
plate and a good friend with a Bridgeport
did the holes for reasonable fee. Too bad Tracy doesn't offer this as an option.
|
|