Might talk to the Cozygirls,
|
CG-RX-RMP Reduction Drive Mounting Plate / Side Starter
Price: (only available with complete mounting kit at this time)
Product Information: Side mount starter type redrive mounting plate for RWS Redrive.
Includes standoffs, spacers and hardware. Requires Lord Mount Kit, 13B or 20B Bolt Kit and Tubular Mount.
|
| |
http://www.cozygirrrl.com/aircraftparts.htm
Bobby
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Bill Bradburry
Sent: Monday, January 21, 2013 12:43 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Moving the starter from the bottom to the side
I wonder what the diameter of the three holes are?
Bill
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Mark Steitle
Sent: Monday, January 21, 2013 1:18 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Moving the starter from the bottom to the side
Bill,
I moved mine to the 9 o'clock position (plugs side) by building a whole new plate. Since the bell housing bolts locate the center position, it requires very accurate locating of the holes as does the center hole which has a counter-bore for the seal. I cut the plate and a good friend with a Bridgeport did the holes for reasonable fee. Too bad Tracy doesn't offer this as an option.