I wonder what the diameter of the three
holes are?
Bill
From: Rotary motors in aircraft
[mailto:flyrotary@lancaironline.net] On
Behalf Of Mark Steitle
Sent: Monday, January 21, 2013
1:18 PM
To: Rotary
motors in aircraft
Subject: [FlyRotary] Re: Moving
the starter from the bottom to the side
Bill,
I moved mine to the 9 o'clock position (plugs side) by building a whole
new plate. Since the bell housing bolts locate the center position, it
requires very accurate locating of the holes as does the center hole which has
a counter-bore for the seal. I cut the plate and a good friend with a Bridgeport did the holes
for reasonable fee. Too bad Tracy
doesn't offer this as an option.