Received-SPF: none
 receiver=logan.com; client-ip=204.127.217.106; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-6019811@logan.com>
In-Reply-To: <list-6019811@logan.com>
Subject: RE: [FlyRotary] Renesis fuel pressure question
Date: Sat, 19 Jan 2013 10:57:17 -0500
Message-ID: <924321326310423DB0A30305BF67327F@Desktop>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: Ac32W8iB5NToXV57QDqUNkz72rc5JAAALYoQ

All of the fuel injector capacity figures that I have seen are at a pressure
of 43.5 psi. That is the pressure I use for my Renesis.

There is a calculator on the lower part of this page that will tell you what
injector flow you will get with the fuel pressure changes.

http://www.witchhunter.com/injectorcalc1.php

Bill B

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Charlie England
Sent: Saturday, January 19, 2013 10:43 AM
To: Rotary motors in aircraft
Subject: [FlyRotary] Renesis fuel pressure question

While perusing an old document describing the then-new Renesis, I 
noticed that the fuel pressure was spec'd at 392kPa, which if Google is 
to be believed, amounts to 52psi. How many of you are running pressure 
that high? If you're not ( I seem to remember 30-35 for a lot of 
installations), how much does that affect injector capacity and fuel 
atomization (efficiency)?

Charlie

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html