X-Virus-Scanned: clean according to Sophos on Logan.com
Return-Path: <echristley@att.net>
Received: from mx2.netapp.com ([216.240.18.37] verified)
  by logan.com (CommuniGate Pro SMTP 5.4.5)
  with ESMTPS id 5566294 for flyrotary@lancaironline.net; Tue, 29 May 2012 14:14:05 -0400
Received-SPF: none
 receiver=logan.com; client-ip=216.240.18.37; envelope-from=echristley@att.net
X-IronPort-AV: E=Sophos;i="4.75,678,1330934400"; 
   d="scan'208";a="651823253"
Received: from smtp2.corp.netapp.com ([10.57.159.114])
  by mx2-out.netapp.com with ESMTP; 29 May 2012 11:13:30 -0700
Received: from [10.62.16.167] (ernestc-laptop.hq.netapp.com [10.62.16.167])
	by smtp2.corp.netapp.com (8.13.1/8.13.1/NTAP-1.6) with ESMTP id q4TIDTBU002344
	for <flyrotary@lancaironline.net>; Tue, 29 May 2012 11:13:29 -0700 (PDT)
Message-ID: <4FC51189.8090606@att.net>
Date: Tue, 29 May 2012 14:12:25 -0400
From: Ernest Christley <echristley@att.net>
Reply-To: echristley@att.net
User-Agent: Thunderbird 2.0.0.24 (X11/20100623)
MIME-Version: 1.0
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Exhaust temp
References: <list-5565570@logan.com>
In-Reply-To: <list-5565570@logan.com>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

Lehanover@aol.com wrote:
> I was hoping you wouldn't see this, but now that the cat is out of the
> bag............
>  
> You can see the need for some shielding between the headers and any
> items that you don't want at the same temperature. Radiant energy is
> line of sight. If the header can see it, up goes the temperature.
>  
> Pieces of .015" stainless stood off the header about 1/2" to 3/4" breaks
> the line of sight. Building such on the header reduces the amount of
> material involved. It is easier to not heat things up than it is to cool
> it after you have. Use 1/4" hose clamps to hold onto the shielding.
>  
> A small blast tube to keep things moving past the headers is helpful.
> I can make a picture if you like. Helps keep heat out of the intake
> system and thus more power. Very easy. Amazing results.
>  
> Lynn E. Hanover
>  
>  
My exhaust is encased in a .015 stainless box down to the end of the collector.  The down pipe and muffler are exposed,
and I see where it is blistering the belly paint already.  I'll be wrapping more of the exhaust in the thin stainless.
I will also open the stainless box up to allow some blast air through. First I have to change that down pipe from 1.5"
dia to 3".  I can't seem to get above 5100RPM, and I think exhaust backpressure is my issue.