Return-Path: <steve@tsisp.com>
Received: from [65.23.108.33] (HELO mail.tsisp.com)
  by logan.com (CommuniGate Pro SMTP 4.1.8)
  with ESMTP-TLS id 2981522 for flyrotary@lancaironline.net; Sat, 07 Feb 2004 22:07:19 -0500
Received: from stevehome ([])
        by mail.tsisp.com (Technical Support Inc.) with SMTP id BGA74184
        for <flyrotary@lancaironline.net>; Sat, 07 Feb 2004 22:07:21 -0500
Reply-To: <steve@tsisp.com>
From: "Steve Brooks" <steve@tsisp.com>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
Subject: RE: [FlyRotary] Re: Oil Cooler
Date: Sat, 7 Feb 2004 22:07:43 -0500
Message-ID: <003701c3edf0$b901e930$6400a8c0@WORKGROUP.local>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Priority: 3 (Normal)
X-MSMail-Priority: Normal
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
Importance: Normal
In-Reply-To: <list-2981333@logan.com>
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165

I am shooting for April to be complete & first flight.

Steve

 -----Original Message-----
From: 	Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]  On
Behalf Of sqpilot@earthlink
Sent:	Saturday, February 07, 2004 6:54 PM
To:	Rotary motors in aircraft
Subject:	[FlyRotary] Re: Oil Cooler


----- Original Message -----
From: "Steve Brooks" <steve@tsisp.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, February 07, 2004 7:20 AM
Subject: [FlyRotary] Re: Oil Cooler


>
> Paul,
>
> I have attached some photos of how I mounted my radiator and oil cooler in
a
> Cozy MKIV.  My oil cooler and radiator sit end-to-end, with the oil cooler
> mounted forward, to the firewall.  The oil cooler just fit between the
> engine mount, which was built by Conversion Concepts.
>
> CUT

Hi, Steve....thanks for the reply and the great pictures.  I also have the
Conversion Concepts motor mount, and my oil cooler is mounted similar to
yours....laying on it's face, instead of perpendicular to the airflow.
Well, actually, I tilted it around 30 degrees or so from the horizontal
position.  My oil cooler is mounted further aft than yours, and my radiator
is the closest to the NACA duct.  My radiator is mounted perpendicular to
the airflow, so I shouldn't have any problems with the radiator getting
adequate airflow....just not so shure about the oil cooler. On the other
side of the coin, I understand that approximately 1/3 of the heat is
rejected thru the oil cooler, so I might be OK.  Thanks again for taking the
time to send pictures and description.  How close to flying might you be?
Thanks again. Paul Conner



>>  Homepage:  http://www.flyrotary.com/
>>  Archive:   http://lancaironline.net/lists/flyrotary/List.html