Mailing List flyrotary@lancaironline.net Message #5776
From: John Slade <sladerj@bellsouth.net>
Subject: RE: [FlyRotary] Re: Oil Cooler
Date: Sat, 7 Feb 2004 09:45:40 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
> oil flow diagram, it shows the oil exiting the
> engine on the waterpump end of the engine, going into the top of the oil
> cooler, then exiting the bottom fitting of the oil cooler (where the
> thermostat is), and re-entering the engine underneath the oil
> filter (close to the oil pan).
Thanks, Paul.
By the way, I couldnt find a suitable spot for the long 2nd gen cooler in
the Cozy cowl. I went with two 3rd gen stock oil coolers, one either side of
the rad. This might be an option for you if the long one wont fit.
Regards,
John Slade


Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster