Thanks, Marv,

    I looked them up on their new web site Ray Allen and got some ideas from
it.  I think I will use a10 turn pot with a gear and rack and then drive a
10 position LED bar with the output to form an indicator.  Very similar to
what they have done.

Ed


Subject: [FlyRotary] Re: Linear Position Transducer?


> I took some photos today of the ladder display and linear sensor from MAC.
>  This first pair is with the sensor at its fully extended position and the
> display lit in the closed position.
>
> The readout has no legend on it... the legend on this one is a black vinyl
> overlay, and now that I've taken a closer look at it I think I'm going to
> replace it.  The alignment of the white bars with the LEDs is off by a
bit.
>  Fortunately I have a couple spares.
>
>     <Marv>
>


----------------------------------------------------------------------------
----


> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>