Message-ID: <20040204001755.77116.qmail@web60401.mail.yahoo.com>
Date: Tue, 3 Feb 2004 16:17:55 -0800 (PST)
From: ronald GOWAN <rongowan@yahoo.com>
Subject: Re: [FlyRotary] Re: oil supply for Ross
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
In-Reply-To: <list-2973873@logan.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

I would think you have a bit too much prop.  I would
run it and see what kind of static RPM you have.  I
need to double check my Marcotte but I think it turns
the same direction as the engine.  If that is the case
I may sell the prop off my pusher Ross PSRU.
--- "sqpilot@earthlink" <sqpilot@earthlink.net> wrote:
> 
> ----- Original Message -----
> From: "ronald GOWAN" <rongowan@yahoo.com>
> To: "Rotary motors in aircraft"
> <flyrotary@lancaironline.net>
> Sent: Saturday, January 31, 2004 5:12 PM
> Subject: [FlyRotary] Re: oil supply for Ross
> 
> 
> > Paul,  my Long EZ with a rotary flew just like a
> Long
> > EZ with a 0-320 but much smoother.  My top speed @
> > 6000 RPM was right at 200 MPH indicated @ 1500 FT.
>  I
> > had a Performance 3 bladed prop (62X72) and used a
> HA6
> > carb.  My new cooling system is going to be much
> > different than the first.  The SQ2000 has a bigger
> > firewall so your cooling should be easier than
> what I
> > am going through. Fuel burn at high cruise was
> about 8
> > GPH.
> > --- Marvin Kaye <marv@lancaironline.net> wrote:
> > > Posted for "sqpilot@earthlink"
> > > <sqpilot@earthlink.net>:
> > >
> > >Hi, Ron....I noted that you have a Performance 3
> bladed prop that is
> 62x72.  The prop I have is a 3-blade Performance
> prop that is 64x78. I have
> the Ross 2.17:1 PSRU with a normally aspirated
> (originally turbo) engine.
> Do you think that I may be over-propped?  Thanks
> again for your opinion and
> reply.  Paul Conner, 13b powered SQ2000 canard.
> 
> 
> 
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:  
http://lancaironline.net/lists/flyrotary/List.html


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/