Mailing List flyrotary@lancaironline.net Message #56268
From:
<bktrub@aol.com>
Subject:
Re: [FlyRotary] Re: Sam Hodges NTSB write up
Date:
Mon, 15 Aug 2011 22:03:39 -0400
To:
<flyrotary@lancaironline.net>
Exactly my thoughts. Really a nece installation- but needs heat sheilding above the exhaust manifold.
Brian Trubee
-----Original Message-----
From: kenpowell@comcast.net
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Mon, Aug 15, 2011 6:59 pm
Subject: [FlyRotary] Re: Sam Hodges NTSB write up
The obvious issue is the lack of a heat shield between the injectors and the exhaust. This can cause the fuel to boil. Beautiful installation other than this.
Ken Powell
From:
"Bob Perkinson" <
bobperk90658@bellsouth.net
>
To:
"Rotary motors in aircraft" <
flyrotary@lancaironline.net
>
Sent:
Monday, August 15, 2011 8:27:30 PM
Subject:
[FlyRotary] Re: Sam Hodges NTSB write up
Here are a couple of pictures of Sam's engine installation. These were taken last year at the Paducah round up.
Bob Perkinson
RV-9 13B
--
Homepage:
http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
Subscribe (FEED)
Subscribe (DIGEST)
Subscribe (INDEX)
Unsubscribe
Mail to Listmaster