X-Virus-Scanned: clean according to Sophos on Logan.com Return-Path: Received: from pacmmta53.windstream.net ([162.39.147.112] verified) by logan.com (CommuniGate Pro SMTP 5.4c3j) with ESMTP id 4983008 for flyrotary@lancaironline.net; Fri, 13 May 2011 17:06:17 -0400 Received-SPF: pass receiver=logan.com; client-ip=162.39.147.112; envelope-from=jskmberki@windstream.net Return-Path: X-WS-COS: WSOB804 X-Cloudmark-Category: Undefined:Undefined X-Cloudmark-Analysis: v=1.1 cv=jFaLoDcWUDtG9Ign3rDksDFnky1IxTBacjtN0A2ORlE= c=1 sm=0 a=UT_QgiwtmQIA:10 a=8nJEP1OIZ-IA:10 a=ykRn367H8lnCpIZsWGwA:9 a=wPNLvfGTeEIA:10 a=n58tTjVuYMW/rUfaRcte9Q==:117 X-Cloudmark-Score: 0 Authentication-Results: pacmmta53 smtp.user=jskmberki; auth=pass (LOGIN) Received: from [174.130.37.208] ([174.130.37.208:3763] helo=joehomepc) by pacmmta53 (envelope-from ) (ecelerity 2.2.2.45 r()) with ESMTPA id 17/E5-22977-62D9DCD4; Fri, 13 May 2011 17:05:43 -0400 Message-ID: <036001cc11b1$cd8c4f70$01fea8c0@joehomepc> From: "josrph berki" To: "Rotary motors in aircraft" Subject: RD1C Date: Fri, 13 May 2011 17:07:43 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.2001 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.2001 Has anyone built their motor mount where the rear of the motor is supported via the bellhousing bolt locations? I mocked this up thinking that I could cut the spacers for the RD1C down and use the same locations. Upon reading the instructions from Tracy, he locates the plate that supports the drive using two of these bellhousing bolt holes that have dowels pressed into them. My plan is to machine a steel bushing that fit over these bushings and enlarge the holes on the motor mount arms to fit over it. The part that protrudes past the arm will be turned to the diameter of the dowel so that Tracy's spacers will line up with the dowel locations. That way the plate that supports and aligns the drive does not carry motor mount loads. Does this sound OK? Thanks for any help. Joe Berki Limo EZ