|
As much as I
hate to do this I am listing my Cozy Mark-IV project for sale.
My business and my wife's have just not been doing well enough,
and this is unfortunately the first to go as we would rather
sell the plane before we sell our house. Please let me know if
you are interested.
Pictures: https://picasaweb.google.com/remconinc/CozyMarkIVProject#
Below is the
description I have of the project as it is now, I may have left
out a few details, but will get you pictures this evening once I
get back to the house.
Let me know if you are interested. I
have attached pictures that were taken quite a while ago that do
not represent the project in it's current state. Also there are
pictures of the engine as installed in Bulent Aliev's cozy to show
what a nice setup this is. He had electrical problems that he
later figured out. He purchased a continental engine and had the
same problems as he did with the rotary. It turned out to be just
the custom spark plug wires he was having a friend make up. They
didn't have any shielding. He kicked himself after he sold the
engine to me as he had the same problems
MAIN GEAR Tires: Cleveland 199X133 Brakes: heavy duty Cleveland brakes Wheelpants:
None
CANARD: R1145MS
NOSE &
NOSE GEAR: Wright
automatic nose gear installed and functional
How tall a
pilot is the pilot space set up for?: 5’ 9”
CONTROL
SYSTEM\TRIM SYSTEM: Dennis Olheman dual brake/rudder system
partially installed. Cozy Girls Hidden rudder bellhorns,
anodized control system rods, with upgraded bearings over
factory bushings.
CANOPY: Todd's Canopy - Texas Sized Cozy Canopy Clear with 4
rear tinted windows turtle back was redesigned and added 2-1/2"
to the height to match up with the canopy and tapers down to the
plans size for the firewall.
WING
RIGGING: none
RUDDERS: Need to be glassed in winglet and cut out
ELECTRICAL
SYSTEM Battery: none Starter: Mazda installed Alternator:
Installed on Engine
Instruments: Remanufactured instruments:
Attitude indicator, Vertical speed indicator, gyro compass, gyro
suction, altimeter, airspeed in knots with temp, turn indicator
and bezels.
Radios: New Full Terra Trimble TRT
250D, Plus rack for avionics. Antenna’s
glassed in.
Intercom: RST-565 audio panel and
remote marker receiver (6.25 in. wide faceplate)
ENGINE: Mazda Rotary 13B
Cosmo with mount and accessories. Already flown in Bulent
Aliev's Cozy. Includes fuel system dual pumps, electronic engine
control system. Engine was built to run a turbo. Needs only fuel
lines, pressure regulator/distribution block, air filter, oil
cooler and filter, and fuel filter.
PROPELLER: IVO Magnum Electric Adjustable Prop 70" to be
trimmed to 68". Can send it off an have IVO cut to fit. Needs
prop hub from IVO.
FINISHING: Not finished
NIGHT
LIGHTING: None
UPHOLSTERY: Light brown seat cushions for front seats none for
back
Description:
Chapters 4-7 completed
Chapter 8 is completed, but no
headrests were installed. I had other ideas for placement of the
headset jacks. The seat belt attach
points are in and complete as well.
Chapter 9 I purchased featherlite
landing gear and mounted Cleveland wheel and brakes
that were larger than called for 199X133 for better braking. Did not run the brake lines but have all
the parts.
Chapter 10 I purchased featherlite
canard R1145MS. It is ready for sanding (most of which has been
done on the top. Lift tabs need to be
adjusted per correction to the plans.
Chapter 11 Elevators Constructed and
ready for west system and sanding.
Chapter 12 Canard pre-fitted per
plans. Tabs still require adjustment per last plans correction
Chapter 13 Wright automatic nose lift
installed. Chapter is complete through
step 5. Dennis Olheman brake/rudder
system. Step 6 partially
installed. Step 7 not installed. Step 8 completed. Step 9
complete. Step 10 outside installed and glassed.
Top not completed yet although it is mostly glassed in.
Step 11 not started.
Chapter 14 Completed ready to be
installed
Chapter 19 Featherlite wings complete
and ready for west system. Step 11 not done.
Chapter 20 Winglets and rudders
purchased not started.
Accessories:
120 inch throttle, mixture, and carb
heat cables (Cessna like); Light Brown Leather seats for front
passengers; plans #727; Epoxy pump; Brake lines and fittings;
Walnut flex for covering panel. Two
gallons of West System still in box. Fiberglass both uni and
bid. Gallon of zolatone for interior. (The
panel is not yet cut out so placement is up to buyer)
PRICE: Make Offer on Whole Package or less
engine
Overall impression: Bought from the Son-in-law of Alex Strong,
would not let his son-in-law make junk, so if Alex says it is well
built, you are most of the way there – you can have someone else
look it over.
--
David Moyer
Remcon Associates, LLC
Tel: 281-360-2158
Fax: 281-360-2168
Cell: 281-795-2712
|