flyrotary@lancaironline.net Mailing List Archive

Brian,

You are correct............I used the 20B photo to use as referance to the front side housing

water pump stud positions and I misnamed the photo................My bad !!..............<:)

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: "bktrub@aol.com" <bktrub@aol.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Thu, April 28, 2011 12:34:19 AM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

The 13BREW shouldn't have the provision for a distributor type crank angle sensor, it has a trigger wheel and sensors.

Brian Trubee

-----Original Message-----
From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, Apr 27, 2011 9:15 pm
Subject: [FlyRotary] Re: Mistral 'Like' Intake

Jarrett,

Another photo .....................

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, April 27, 2011 8:16:32 PM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

Jarrett,

I am just full of it aren't I !!.................(Info that is).................<:)

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, April 27, 2011 6:57:35 PM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

Jarrett,

Photo of 20B cosmo front side housing with notation you can read !!.............

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, April 27, 2011 4:06:08 PM
Subject: [FlyRotary] Re: Mistral 'Like' Intake

Jarrett,

A little more info about adapting the Mistral backplate to the 1993-99 13BREW and the 13B & 20B Cosmo

engines............I do not have a photo of the Renesis front side housing but I believe it to be almost identical to

the 93-99 13BREW with the same bolt pattern from looking at the gasket..........

Kelly Troyer
"DYKE DELTA JD2" (Eventually)

"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold

"TURBONETICS"_TO4E50 Turbo

--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html