Received-SPF: none
 receiver=logan.com; client-ip=207.115.11.51; envelope-from=bbradburry@bellsouth.net
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "'Rotary motors in aircraft'" <flyrotary@lancaironline.net>
References: <list-4834767@logan.com>
In-Reply-To: <list-4834767@logan.com>
Subject: RE: [FlyRotary] Re: Al Tubing in fuel line...
Date: Tue, 1 Feb 2011 21:29:44 -0500
Message-ID: <D6717C7CFABE4153821CE02EF330F338@Desktop>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Thread-Index: AcvCaFPjzKGjpPB3Qd27uJ1LN2pNqQAGJCjA

Well, unfortunately!!    :>)

Bill B

-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of Patrick
Sent: Tuesday, February 01, 2011 6:32 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Al Tubing in fuel line...

Yeah, I try to avoid rubber fuel lines too. Stainless braid, silicone, 
fire-sleeved line; call me picky.

  And hopefully your firewall is not plastic...!

Ernest Christley wrote:
> Patrick wrote:
>> Bill,
>> I would suggest taking a propane torch to a piece of scrap aluminum 
>> (beer can) and a piece of stainless.  It may affect your comfort 
>> level about aluminum in the engine compartment.
>>
>> Personally, I would never use aluminum fuel line in front of the 
>> firewall.
>>
>> Patrick
> If you're going to do that, you might as well include those rubbery 
> pieces of fuel line in the test.  And remember, you're telling that to 
> a guy who has the engine mounted to a plastic airplane 8*)
>
> -- 
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   
> http://mail.lancaironline.net:81/lists/flyrotary/List.html


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html