We were minutes away from an engine tear-down, when we tried one more time to extract the broken tension bolt. The bore scope allowed us to see exactly where
the pilot hole was drilled into the broken piece; the left-hand drill bits would not grab on and extract the part but did help in enlarging the hole and perhaps loosening the threads a little. Ultimately I was able to start an easy-out with light tapping
and it grabbed on – the result is in the attached photo. The easy-out is welded to the end of the original broken bolt and you can see that a spiral of RTV was applied to the length of the bolt between the threads and the bolt head.
Jeff
From: jeffurs@xplornet.com [mailto:jeffurs@xplornet.com]
Sent: Sunday, January 30, 2011 6:23 PM
To: Jeff Whaley
Subject: 13B
__________ Information from ESET NOD32 Antivirus, version of virus signature database 5833 (20110131) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com