|
|
Dave wrote:
That being said, for the amateur builder who is only going to do this once in his life, what is going to be easier? Getting the engine setting perfectly on the plate, with the requisite sealant around the oil port where it should be, and more importantly NOT where it SHOULDNT be??? or having a large enough hole that you can mount the pickup tube with spacer AFTER you have placed the engine on the plate and perhaps moved it around a bit in the process?
Believe it or not, Dave. Making the all inclusive plate will probably be easier. You're starting with a single plate of aluminum, and it is just a matter of correctly locating the holes. The easiest way to do this is to bolt the housings together, brush a thin layer of oil on the bottom. Attach a sheet of paper to the aluminum plate, and then set the block on top of the paper. Every hole will be accurately located.
A thin layer of sealant around the pickup hole just prior to bolting on the plate isn't hard. Put the sealant on the engine. Not the plate.
The other way, there is multiple pieces that have to be machined and tracked.
|
|