Chrissi,
Unless you have a local source check with Curtis at "Revvinsevens" where
we bought the front covers................He probably has the stock Renesis pulleys
available unles you want to go for maximum lightness and spring for aftermarket
aluminum pulleys ("Pricey")......He also would be a good source for the eccentric
pulley and timing wheel............
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: "CozyGirrrl@aol.com" <CozyGirrrl@aol.com>
To: keltro@att.net
Sent: Mon, January 10, 2011 6:16:38 PM
Subject: Renesis pump on 13B - alternator
Kelly,
If you have not cut the alternator mount off the top of the WP casting portion, don't do it just yet.
Not for the alternator per se but we have acquired a side mount alternator mount, after some analysis came up with a simpler alternative side mount design of our own. The mount tab on top of the WP housing is perfect for a turnbuckle type tension arm down to the side mount alternator and is not affecting overall height.
Still need a ribbed WP and Alternator pulley to confirm alignment. We'll make the first mount with slotted holes to get alignment right.
...Chrissi