| Kelly,
I'm running a stock Renesis pulley on my 20B. This was a difficult swap from the stock pulley, requiring machining. I did the swap when I switched over from the old CAS to the Renesis CAS. We could never get the EC-2 to work correctly with this setup, so I gave up on the idea and switched back to the original CAS. I recommend using the stock 13B pulley if possible.
Mark On Thu, Dec 30, 2010 at 7:12 PM, Kelly Troyer <keltro@att.net> wrote:
Mark,
Are you using the stock Renesis eccentric shaft pulley or aluminum aftermarket pulley ??
Kelly Troyer
"DYKE DELTA JD2" (Eventually)
"13B ROTARY"_ Engine
"RWS"_RD1C/EC2/EM2
"MISTRAL"_Backplate/Oil Manifold
"TURBONETICS"_TO4E50 Turbo
From: Mark Steitle <msteitle@gmail.com>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Thu, December 30, 2010 7:04:45 PM
Subject: [FlyRotary] Mazmart Renesis Water Pump
David/Kelly,
Here is a picture of my water pump conversion. The WP cartridge is the new one from Mazmart; fits exactly like the Renesis cartridge did.
|