|
|
Someone on the list is using an EWP. I don't remember who at the moment.
Maybe he will chime in later.
Bill B
-----Original Message-----
From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
Behalf Of josrph berki
Sent: Saturday, September 25, 2010 1:51 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Re: Coolant flow
Bill,
My installation does not have enough room to use the stock RX7 pump. I have
a Toyota Corolla pump that can with some modification be mounted on one side
of the motor. I had to get a Denso alternator to get an alternator to fit
along side the motor. I found a block that permits connectionof hoses to
where the pump used to be. The reason that I am asking all of these somewhat
strange inqueries is just to get a working scenario. My firewall is 22"
wide and this is a pusher so things get worse as you go aft. Another item
that takes a lotof room is the exhaust augmenter. The engine is also a P
Port. I do not believe I can get the cooling right without some additional
means. The shape of the cowls on a canard pusher is critical to effiency so
i am trying to stay tight.
I saw a video on a RX7 discussion group that used the Stewart EWP using the
similar block connection. Don't know if it would work in an AC.
Joe Berki
Limo EZ
----- Original Message -----
From: "Bill Bradburry" <bbradburry@bellsouth.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Saturday, September 25, 2010 11:52 AM
Subject: [FlyRotary] Re: Coolant flow
> What are you trying to do Joe? Does your engine not have a water pump or
> are you trying to accomplish something better? Someone on the list has an
> electric water pump hooked up.
>
> Bill B
>
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On
> Behalf Of josrph berki
> Sent: Saturday, September 25, 2010 10:50 AM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Coolant flow
>
> Thanks for the info on the coolant flow. Currently the Mazda pump pulls
> coolant from the rad and pushes it into the driver's side water passage
per
> the info that you stated. The coolant comes out of the block on the
> passengers' side and goes to the radiator.
>
> Would it be possible to place a stand alone pump inlet at the outlet of
the
> block on the passengers's side and push the water through the radiator
then
> back into the block inlet on the driver's side? The down side would be
that
> the pump would see the hotest coolant. Are there other issues? Thanks
for
> any help.
>
> Joe Berki
> Limo EZ
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub:
> http://mail.lancaironline.net:81/lists/flyrotary/List.html
>
>
> --
> Homepage: http://www.flyrotary.com/
> Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
--
Homepage: http://www.flyrotary.com/
Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|