From: josrph berki <jskmberki@windstream.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Fri, September 24, 2010 5:58:18 PM
Subject: [FlyRotary] Re: Fwd: Alternator
Charlie,
I have been trying to fit the rx7 alternator and the Toyota waterpump into
my installation with frustration. I took the alternator to Advance
Autoparts and placed it next to a Denso replacement. The replacment was
about 1" smaller in diameter which may be the difference between fitting an
alternator or fitting a lycoming. Just kidding. I wish there was a way to
see if it fits without spendin $125.00 just to find out that it dose not
fit. Thanks for the info.
Joe Berki
Limo EZ
----- Original Message -----
From: "Charlie England" <
ceengland@bellsouth.net>
To: "Rotary motors in aircraft" <
flyrotary@lancaironline.net>
Sent: Wednesday, September 22, 2010 9:18 PM
Subject:
[FlyRotary] Fwd: Alternator
> Hi Joe,
>
> If you haven't bought one yet, search ebay for 'suzuki samurai
> alternator'. If you intend to use the original mount point, it should
> bolt right up. It's a bit lighter than the stock model, & smaller in
> diameter.
>
> Geo Metro is similar, with, IIRC, a bit less output. The numbers in the
> attachment are what's on the one in the pic, but there are quite a few
> variations. Just be sure it's a Denso; some of the replacements aren't
> the same quality.
>
> BTW, pulley size might not be too big a deal on the rotary. The Lyc guys
> do it because the pulley on a Lyc flywheel is about 8".
>
> Charlie
>
----------------------------------------------------------------------------
----
> --
> Homepage: http://www.flyrotary.com/> Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html>
--
Homepage:
http://www.flyrotary.com/Archive and UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html