Mailing List flyrotary@lancaironline.net Message #52210
From: Mark Steitle <msteitle@gmail.com>
Subject: Re: [FlyRotary] Re: Alternator
Date: Thu, 23 Sep 2010 15:11:11 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Kelly, 

Not a problem on the pulley.  I was just trying to help Jeff out.  Personally, I think the 5" pulley is a little over-kill, but that depends on the size of the crank pulley.  The 4" pulley 
slows the alternator down to a reasonable level while still providing for adequate charging during ground runs.

Mark

On Thu, Sep 23, 2010 at 2:16 PM, Jeff Whaley <jwhaley@datacast.com> wrote:

Thanks for the offer Mark and for the extra info Kelly, but I’m going to try the Ed Anderson route and get a set of Gates belts.

In conjunction with that I’ll double-check the tension …

Jeff

 

From:

Kelly Troyer <keltro@att.net>

Subject:

Re: Alternator

Date:

Wed, 22 Sep 2010 13:21:13 -0700 (PDT)

To:

Rotary motors in aircraft <flyrotary@lancaironline.net>

Message Header

Undecoded Message

Group,

    Addendum to last post.........The 75-209 pulley is 3.25 in diameter and is about $35.00 but

the 75-208 is 5.0 inch in diameter about $65.00 and is currently $20.00 on closeout..........

 

Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

 

 


From: Kelly Troyer <keltro@att.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Wed, September 22, 2010 3:11:04 PM
Subject: Re: Alternator

Mark and All,

   Just checked with Canton Racing.........The 5 inch V belt pulley currently lists for $64.50

but they have them on closeout for $20.00 plus UPS............They have 9 of them left after

My order for one..............Not trying to messup your sale Mark but thought others of the

group might need one...........FWIW............

 

http://www.cantonracing.com/

  

Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold

 

 

From:

Mark Steitle <msteitle@gmail.com>

Subject:

Re: [FlyRotary] Re: Alternator

Date:

Wed, 22 Sep 2010 13:18:31 -0500

To:

Rotary motors in aircraft <flyrotary@lancaironline.net>

Message Header

Undecoded Message

Jeff,

 

I bought a pair of single vee pulleys from Canton Racing (http://www.cantonracing.com/).  I used their p/n 75-209 for the Mitsubishi 15mm shaft alternator ($38.40/ea).  It is black hard anodized aluminum.  I have since switched to serpentine pulleys, so I don't need it any longer.  So, if you're interested, contact me off line.

 

 

 

Jeff Whaley
Manager, Test and Repair

International Datacasting Corp.

Tele: 613-596-4120 (ext: 2295)
Fax:  613-596-9208

www.datacast.com

 



__________ Information from ESET NOD32 Antivirus, version of virus signature database 5474 (20100923) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

This message, and the documents attached hereto, is intended only for the addressee and may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original message. Thank you.

Image
image001.gif
Image
image002.gif
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster