ED & other dual Gates belts users ( including myself )
at our last chapter fly-in two gyro planes came in & the
owner/designer/builder was telling Greg & I about a company
that makes heavy-duty "matched " v-belts for his gyro drive
sys., point is they are matched, one of our belts is stretching
differently than the other ( one is loose other is tight ). Greg
is going to purchase a couple of belts for our 13B stock 70A
Mazda Alt. with under-drive dual v-belt sys., will let you know
as soon as we know. David R. Cook RV6A Rotary last rivets
now installed ( Data plt. ) slapped in the face by the economy
so moving very slow.
----- Original Message -----
From: "Jeff Whaley"
<jwhaley@datacast.com>
To: "Rotary motors in aircraft"
<flyrotary@lancaironline.net>
Sent: Thursday, September 23, 2010 3:16:04 PM
Subject: [FlyRotary] Re: Alternator
Thanks for the offer Mark and for the
extra info Kelly, but I’m going to try the Ed Anderson route
and get a set of Gates belts.
In conjunction with that I’ll
double-check the tension …
Jeff
|
Group,
Addendum
to last post.........The 75-209 pulley is 3.25 in
diameter and is about $35.00 but
the
75-208 is 5.0 inch in diameter about $65.00 and is
currently $20.00 on closeout..........
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
From: Kelly Troyer
<keltro@att.net>
To: Rotary motors in aircraft
<flyrotary@lancaironline.net>
Sent: Wed, September 22, 2010 3:11:04 PM
Subject: Re: Alternator
Mark and
All,
Just
checked with Canton Racing.........The 5 inch V
belt pulley currently lists for $64.50
but they
have them on closeout for $20.00 plus
UPS............They have 9 of them left after
My order for
one..............Not trying to messup your sale
Mark but thought others of the
group might
need one...........FWIW............
http://www.cantonracing.com/
Kelly Troyer
"Dyke Delta"_13B ROTARY Engine
"RWS"_RD1C/EC2/EM2
"Mistral"_Backplate/Oil Manifold
|
|
Jeff,
I bought a
pair of single vee pulleys from Canton Racing (http://www.cantonracing.com/).
I used their p/n 75-209 for the Mitsubishi 15mm
shaft alternator ($38.40/ea). It is black hard
anodized aluminum. I have since switched to
serpentine pulleys, so I don't need it any
longer. So, if you're interested, contact me off
line.
|
Jeff
Whaley
Manager,
Test and Repair
International
Datacasting Corp.
Tele:
613-596-4120 (ext: 2295)
Fax: 613-596-9208
www.datacast.com
__________ Information from ESET NOD32 Antivirus, version of
virus signature database 5474 (20100923) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
This message, and the
documents attached hereto, is intended only for the addressee
and may contain privileged or confidential information. Any
unauthorized disclosure is strictly prohibited. If you have
received this message in error, please notify us immediately
so that we may correct our internal records. Please then
delete the original message. Thank you.