flyrotary@lancaironline.net Mailing List Archive

Well, I’m in the survey as NOT MODIFIED.

Ed, On the same subject, how many hours are you getting out of your alternator belts?

I’ve got about 50 hours on mine and am seeing black powder on the top cowling underside and the same on the belts.

And where can I get a 4” diameter dual-groove pulley for the rotary?

I bought one from Racing Beat but it is only about 2.75-3” diameter … would like to slow my alternator more.

Jeff

From:	"Ed Anderson" <eanderson@carolina.rr.com>
Subject:	Re: [FlyRotary] Re: Alternator
Date:	Tue, 21 Sep 2010 22:22:04 -0400
To:	"Rotary motors in aircraft" <flyrotary@lancaironline.net>

No, Joe, I did not. I had not realized at the time (boy, have I gained an education messing with this alternative engine stuff {:>)) that simply putting a circuit breaker in the field coil line would not necessarily turn off the alternator when it was pulled. I have verified that pulling the CB after the alternator is turning does NOT turn it off - at least not mine. But, I never had an automobile alternator ever run away voltage wise (all have simply quite producing adequate voltage), so decided to leave well enough alone.

I figured my modifications might reduce reliability and never the kind of problem most feared in aircraft usage, so have not altered/modified it. But, other's have. It would be interesting to take a survey and find out how many on the list have or have not modified their alternators.

Ed

--------------------------------------------------
From: "josrph berki" <jskmberki@windstream.net>
Sent: Tuesday, September 21, 2010 7:14 PM
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: [FlyRotary] Re: Alternator

Ed,

Thanks for the input. Did you modify it at all to remove the regulator or
provide for disabling the field?

Joe
----- Original Message ----- From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Tuesday, September 21, 2010 6:38 PM
Subject: [FlyRotary] Re: Alternator

Joe, I still fly with the old standard Rx-7 alternator - have been ever
since I launched in 1998 - never failed so I'm still hauling around about

lbs more weight that I need to. So can't offer you any light weight
solutions. But, there are others that have done research on light weight
alternators whom I'm certain will offer suggestions.

Ed

Edward L. Anderson
Anderson Electronic Enterprises LLC
305 Reefton Road
Weddington, NC 28104
http://www.andersonee.com
http://www.eicommander.com

--------------------------------------------------
From: "josrph berki" <jskmberki@windstream.net>
Sent: Tuesday, September 21, 2010 6:21 PM
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Subject: [FlyRotary] Alternator

> What alternator is being used on the rotary? With EFI and electronic
> ignition I would think a 60 amp would be suitable. Does anyone have a
> light
> weight small solution? Thanks for any help.
>
> Joe Berki
> Limo EZ

Jeff Whaley
Manager, Test and Repair

International Datacasting Corp.

Tele: 613-596-4120 (ext: 2295)
Fax: 613-596-9208

www.datacast.com

__________ Information from ESET NOD32 Antivirus, version of virus signature database 5470 (20100922) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com

This message, and the documents attached hereto, is intended only for the addressee and may contain privileged or confidential information. Any unauthorized disclosure is strictly prohibited. If you have received this message in error, please notify us immediately so that we may correct our internal records. Please then delete the original message. Thank you.

image001.gif

image002.gif