|
Message
He has his 2 evap cores in series - water flows from left core
to rt core - in the hose that connects them right over the prop shaft, he
installed a drain valve like at bottom of an older radiator.
Thanks for the comments
David. Unfortunately, my cores are so high that there isn't room to
put a hose fitting on the top of the tanks. About the best I could do is a
tapped hole, with a low profile plug that could be removed for filling.
From what Ed is saying, it just doesn't sound like this is needed, so I'm not
sure what I'll do yet.
Cheers,
Rusty
|