|
Message
FWIW,
Rusty, I just installed a wood stove in our condo and relined the chimney
on an existing fireplace. We used a special 1/4" foil faced insulation to
get the SS liner to zero clearance fire code. Bottom line: this is some
pretty good stuff. I'd be happy to share some of my left over material
with you if you think you want it. Also have some 1/2" material too.
If you want more info, I'll look up the specs for you.
Regards,
Tommy<><
I'm looking into the best
methods for heat shielding around the exhaust pipes. I'll be squeezing
pipes between the engine mount tube, and cowl, with just less than an inch to
clear on either side. The closest clearance will be about
12"-14" from the exhaust port, so it will still be pretty
hot.
Thanks,
Rusty (Great alcohol
report Jim)
|